Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Feb 2010
    Location
    Rijkevorsel
    Posts
    5
    Rep Power
    0

    ir105 hard drive change

    I changed the hard drive of my IR105, i changed the itf file by copying a wdc hard disk and change it to my harddisk type. Does anyone know if there is limit of harddisksize for those machines. The Service Support Tool says it is not in my itf file but it is there. Maybe the harddisk is to large. I used a WDC WD1600JB-22GVC0 160GB hard drive.

    Thanks


  2. #2
    Senior Tech 100+ Posts MrB's Avatar
    Join Date
    Nov 2009
    Posts
    147
    Rep Power
    18
    Think the only thing is that you can edit the drive type but keep the size the same
    The format IFT file looks for the correct size, not just the model type

    I tried that witha iRC3380i
    I had a 20gig on my car, and not the 80gig, and my SST wouldn't have any of it, so managed to blag a 80gig from the customers ITC dept to get the machine working again

    Not 100% the drive size on a 105, think it's either 20 or 40 gig


  3. #3
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Davenport, Iowa
    Posts
    1,979
    Rep Power
    40
    The drive size was initially 20g on those. I had used a few 160's several years ago, can't remember the model of copier I put them in, I just remember that my 80 gig source had dried up, and I tried the 160's and I was able to get them to work. They were hitachi drives, just remembered. I chose a hitachi drive in the ift file, copied the entire statement for that drive, pasted it back into the file, making sure the formatting looked the same as other entries, and just edited the model number to reflect the 160 model number. They worked fine.


  4. #4
    mohd javeed
    Guest

    Re: ir105 hard drive change

    Quote Originally Posted by gertjedevos View Post
    I changed the hard drive of my IR105, i changed the itf file by copying a wdc hard disk and change it to my harddisk type. Does anyone know if there is limit of harddisksize for those machines. The Service Support Tool says it is not in my itf file but it is there. Maybe the harddisk is to large. I used a WDC WD1600JB-22GVC0 160GB hard drive.

    Thanks
    brother can you please tell how you change WDC
    EVEN I WANT TO CHANGE

    DID YOU GET ANY SOLUTION


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here