Service manual for ir 6000

[wilson]

I have an IR 6000 and it appear E 00061-0001 . I try to clear the error by changing the corona wire and the block but when the error code still there.... Do any of you guys have ideas to solve this problem.....

I also need the service manual for IR 6000 ...Can any one help me ...please...

My email is wilson_njs@hotmail.com

[canonjh]

Hi?
Error Codes
E061
Main Cause The laser shutter is faulty. The laser unit is faulty. The potential measurement
PCB is faulty. The DC controller PCB is faulty.
Mode of
Detection
0001 As the result of potential control, the drum surface potential (VL2)
of the white background is about 200 V (generating solid black images).
0002 The primary charging output used for print output and the drum
surface potential after laser output has been made are about 200 V
(generating solid black images).
and The error must be reset in service mode (COPIER>FUNCTION>DPC>1>OK)
Use it to force the execution of potential control.
The machine is designed so that it will not perform potential control at power-on (recovery mode) if the temperature of the fixing assembly is 70 deg C or higher. If you have replaced the photosensitive drum or the laser unit, or if you have changed the drum potential setting, be sure to execute this mode item.
Procedure
1) Select the item, and type in '1'; then, press the OK key.
2) Turn off and then on the main power switch.
3) See that the machine executes potential control and stops it automatically.

[ravichandra]

pls any one have sst and firmware latest version for IR6000 photo copier this is most urgent my email ID bestxerox1998@mail.com

[JustManuals]

Would you like that gift wrapped too?