on your PG10 do u have a non image area on all four sides
have u tried to calibrate with either a 11x17 / & Ltr-r size
on your PG10 do u have a non image area on all four sides
have u tried to calibrate with either a 11x17 / & Ltr-r size
on pg 10 you can also see if there is a displacemant,if there are colors that overlap the other color or if there is a blank area between any of those color.and you can see it at the 1st testprint of the auto grad.each color should have aligned equaly at the leading edge.
there is no glory without sacrifice
quick update:
PG10 print is ok no displacement
do you mean, the original size sensor?
paper size detection ok.
I changed the reader controller PCB
but still same problem.
I can't concentrate on the machine too much.
still need to do a lot of orders.
I'll put it one side first but will still post the solution (hoping can still solve)
once I'm free.
thanks!
Bookmarks