Irc 3100

[zak]

Hi
i have just replaced the drum and have not reset or iniated it by the service mode will that cause any problems, how do i get into the service mode.
Many Thanks

[teckat]

are u a tech ??

[zak]

No

[teckat]

Sorry but end users need to stay out of service modes/

[zak]

i have technical computer skills and i repair PCs, i can manage the service mode as the instructions came with the new drum just need to access the service mode to do that thnx

[teckat]

Additional Functions, 2 and 8 simultaneously, and then Additional Functions.
wait until copier is ready then do >COPIER > FUNCTION > CLEAR > DRM-LIFE, highlight it and press "OK".

good luck

[Irish]

A Thank you Would have been nice ...

[teckat]

A Thank you Would have been nice ...

you don't seem do get a thank you from end users~~~~~~~~wait till their next post/problem~~~~~~~~~~~~~

hey zak / wake up

[zak]

hey guys sorry ive been out most of the day i shall try your reply to my question tomorrow and like to thank you for your prompt reply

[mrfixit51]

If Zak would have checked his private messages, he would have discovered that I had sent him a well defined procedure detailing the task...