iR600 deck problem

[hemai2005]

Dear all
i face a problem in iR6000 that is no sensing between machine and two paper deck one and two
but tray 3 & 4 ok no problem
can any body help me plz

[smiley]

look if the 2 casset are properly inserted.

[teckat]

Dear all
i face a problem in iR6000 that is no sensing between machine and two paper deck one and two
but tray 3 & 4 ok no problem
can any body help me plz

check sensors /are large trays 1/2 lifting ??
u mean it will not see paper loaded in #1 #2 or is button grayed out for them/ if so re calibrate paper size for them in service mode

[hemai2005]

teckat
machine not see paper loaded,and you know wt is the problem the pickup assy'm for deck one broken 2 day ago, i went today & installed it but my problem above appear and why deck 2 not working also???

[smiley]

check all the pins in the connectors and look if the lacht handle are not broken.

[SCREWTAPE]

Check your cam on the pickup that's circle , it should be bent in a downward angle. When the paper stock get pushed in the cam goes up it hits the lever release and blocks the sensor activating the lift motor.

[smiley]

thats what i mean the lacht handle should hit that cam or maybe the spring of it doesnt aligned.

[MrB]

I could be wrong on this, but what i understand is that Deck 1 & 2 are not working

Are the 2 decks lifting
If NOT could be the lifter PCB, or the DC controller

If it is lifting and not seeing the correct size paper
Copier>Options>CST> P-SZ-C1 (right deck) / P-SZ-C2 (Left Deck) 6=A4 / 15=B5 / 18= LTR

[hemai2005]

this problem solved by changed the
1-lifter PCB which is responsible for two deck 1 & 2
2- motor deck one & two,,machine ok now
and i dont know wt happens may be strong loading on the machine occured ,,,if anybody needed to sharing that is good.
but realy this problem not easy
thanks to all