Thanks:
0
Likes:
0
Dislikes:
0
-
Canon IR C3220 w/C1-trouble setting up and connecting to network
I must be missing something basic but in the additional functions mode I go to systems settings>network settings>TCP/IP and then it gives me only two possibilities: SNTP settings or Use PASV mode for FTP. Since only the SNTP settings allows a TCP/IP address to be entered, this where I am entering the TCP/IP address when I hit the NTP server check I get "error" but not specified. Is there somewhere else I need to enter the TCP/IP address? Help! Thank you.
-
If you have a fiery(C1) you must set up the fiery. Go to the printer tab, hit the status tab, then hit the functions tab and run set up. There will be a network settings tab this is where you set up your network configurations. There's alot of info regarding your question if you use the search option.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks