Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Senior Tech 100+ Posts
    IR 5000 Light copies when RDF is used

    bizhub1's Avatar
    Join Date
    Sep 2008
    Posts
    230
    Rep Power
    34

    Exclamation IR 5000 Light copies when RDF is used

    Hello, I have a 5000 that when the customer uses the rdf the rear of the copies have light streaks thru the page. Of the glass, copies r fine, just when rdf is used. From the samples I have seen it seems like its just the back side but can't confirm yet. Any suggestions would be super.

  2. #2
    Junior Member
    Join Date
    Mar 2010
    Location
    Bucharest
    Posts
    8
    Rep Power
    0

    Wink

    I think is the little glass on the left side of the big one.

  3. #3
    Self Employed 1,000+ Posts D_L_P's Avatar
    Join Date
    Oct 2009
    Location
    Canton, Ohio
    Posts
    1,196
    Rep Power
    53
    Maybe check the doc feed height. If the rear hinge is bent/loose/too high it can let a little light. Bend down so the glass is eye level and close the ADF, it should have an even gap looking from the front or side.

  4. #4
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Clinton, Iowa
    Posts
    1,976
    Rep Power
    54
    Have you cleaned the DADF slit glass to the left of the full sized platen glass? That is what your symptoms sound like to me...

  5. #5
    Field Supervisor 500+ Posts roho's Avatar
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    844
    Rep Power
    43
    I had a similiar situation-ir 5050. df bline was set to 1-No cleaning made a difference. Ribbon cable on the rcon was askew. reseated and ran adjustments.

  6. #6
    Service Manager 10,000+ Posts
    IR 5000 Light copies when RDF is used

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by roho View Post
    I had a similiar situation-ir 5050. df bline was set to 1-No cleaning made a difference. Ribbon cable on the rcon was askew. reseated and ran adjustments.
    the issue is only on one side/ it probably is a hinge issue or like mrfixit51 stated /cln DADF slit glass

    ensure the slit glass is free of debris and the height of the feeder is correct

    Copier>Option>User>SPECK-DP to "1" will notify the user to clean the glass when dust is detected on the slit glass.

  7. #7
    Senior Tech 100+ Posts
    IR 5000 Light copies when RDF is used

    bizhub1's Avatar
    Join Date
    Sep 2008
    Posts
    230
    Rep Power
    34
    Thanks for the replys gentlemen, i will try some of these ideas, I have tried cleaning all the glass, replaced reader controller, done all adj. I am going to try different Rdf.

  8. #8
    Service Manager 10,000+ Posts
    IR 5000 Light copies when RDF is used

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by bizhub1 View Post
    Thanks for the replys gentlemen, i will try some of these ideas, I have tried cleaning all the glass, replaced reader controller, done all adj. I am going to try different Rdf.
    why would u replace the reader controller for a light image rear side/seems like a waste of time !!!!!!

  9. #9
    Senior Tech 100+ Posts
    IR 5000 Light copies when RDF is used

    bizhub1's Avatar
    Join Date
    Sep 2008
    Posts
    230
    Rep Power
    34
    Quote Originally Posted by teckat View Post
    why would u replace the reader controller for a light image rear side/seems like a waste of time !!!!!!
    I spoke with nationwide repair and that was one of their suggestions so since it is a 2 minute job I gave it shot

  10. #10
    Service Manager 10,000+ Posts
    IR 5000 Light copies when RDF is used

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by bizhub1 View Post
    I spoke with nationwide repair and that was one of their suggestions so since it is a 2 minute job I gave it shot

    of course they will say that/ board repair is mostly their game

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here