Results 1 to 6 of 6
  1. #1
    Service Manager 250+ Posts
    Join Date
    Mar 2009
    Location
    singapore
    Posts
    266
    Post Thanks / Like
    Rep Power
    0

    ir 4570 copycards

    after taking out the copycards system how can i disable it thanks


  2. #2
    East Coast Imaging 2,500+ Posts


    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,400
    Post Thanks / Like
    Rep Power
    51
    Quote Originally Posted by johnner66 View Post
    after taking out the copycards system how can i disable it thanks
    Can you expain, what are copycards?

    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  3. #3
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Davenport, Iowa
    Posts
    1,976
    Post Thanks / Like
    Rep Power
    34
    Quote Originally Posted by johnner66 View Post
    after taking out the copycards system how can i disable it thanks
    Most copycard systems hookup to the copier wire harness thru a plug. The connector has a jumper plug on it that is normally left in place near this connector. When the system is disconnected, the jumper plug is reattached to the harness, and the copier is normally good to go again. At least that is how it was done in the olden golden days of yore,,, your mileage may vary of course...

    That is why it is important to leave the installation instructions for that device with the copier...


  4. #4
    Technician 250+ Posts
    Join Date
    Jan 2008
    Location
    The Dalles, or
    Posts
    409
    Post Thanks / Like
    Rep Power
    18
    Another possibility - if you used a control card just turn it off (service mode level 2, Copier>option>acc>cc-spsw). I remember using the shorting plug for the card reader on the iR5000 and NP6050, but (myself) have not used it on a 4570.


  5. #5
    East Coast Imaging 2,500+ Posts


    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,400
    Post Thanks / Like
    Rep Power
    51
    Ahh, Card reader. That's the term I'm familiar with.

    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  6. #6
    Field Supervisor 5,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    12,570
    Post Thanks / Like
    Rep Power
    160
    Quote Originally Posted by johnner66 View Post
    after taking out the copycards system how can i disable it thanks

    go into service mode Level 2 COPIER > OPTION > ACC and set CC-SPSW to "0".


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here