Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    victorml.rodriguez
    Guest

    Re: Canon IR2520 Start up

    Hi,
    A client of mine just got a Canon IR-2525. I have not worked with these copiers, can someone help me on how to access Service Mode. I have installed it, but seem to have a problem with the copied image, it is only giving me about 30% of the original, the rest y plain white, I guess its just toner configuration. How may I access.

    One of the machines actually is getting paper stuck just before it exits the machine.

    I hope I explain myself...my english is not very good

    Thanks!!

  2. #12
    Service Manager 10,000+ Posts
    Canon IR2520 Start up

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR2520 Start up

    Quote Originally Posted by victorml.rodriguez View Post
    Hi,
    A client of mine just got a Canon IR-2525. I have not worked with these copiers, can someone help me on how to access Service Mode. I have installed it, but seem to have a problem with the copied image, it is only giving me about 30% of the original, the rest y plain white, I guess its just toner configuration. How may I access.

    One of the machines actually is getting paper stuck just before it exits the machine.

    I hope I explain myself...my english is not very good

    Thanks!!


    This printer is not your typical Service mode settings/ it is like a FAX SERVICE MODE settings-
    U can cause more harm then good -if not trained on this Series-imageRUNNER_2530_2525/imageRUNNER_2545_2535

    Press > 2 > 8 >
    to get to Service Mode.

    Enter service mode by pressing (*)ADDITIONAL FUNCTIONS key followed by 2 key then 8 key then (*)ADDITIONAL FUNCTIONS
    { each key is pressed separately }

    You need to Stir toner at setup.
    Select Service Mode > CLEAR > ENGINE> TNRST> OK. Toner Stir to take approx. 5 minutes to complete.

    This unit needs a toner stir that is ran through Service Mode during an installation. The Service Mode Toner Stir can be performed by entering SERVICE MODE > CLEAR > ENGINE > TNRINST > OK. The main unit will then stir the toner and will last around 5 minutes and is required for toner agitation. The machine will stop on it's own when complete. The unit can then be tested for image quality after it has completed the toner stir process.

    The Jam Log is included in the Error Log. To print out a JAM/ERR Log, perform the following steps:

    Access Service mode>
    ADDITIONAL FUNCTIONS>2>8>ADDITIONAL FUNCTIONS
    Scroll until you see "# REPORT" hit OK
    Scroll until you see "REPORT OUTPUT" hit OK
    Scroll until you see "ERROR LOG LIST" hit OK

    Outline of Service Mode
    The items that follow may be checked/set using the machine's service mode, which is designed the way the service mode used in fax machines is designed in terms of contents and operation.

    #SSSW
    Use it to register/set basic fax functions (e.g., error control, echo remedy, communication
    error correction). Use it to make settings related counter functions.
    #MENU
    Use it to register/set items related to functions needed at time of installation (e.g., NL
    equalizer, transmission level).
    #NUMERIC
    These setting items are for inputting numeric parameters such as the various conditions for
    the RTN signal transmission.
    #SPECIAL
    These setting items are for telephone network control functions. Do not use.
    #NCU
    These setting items are for telephone network control functions such as the selection signal
    transmission conditions and the detection conditions, for the control signals sent from the
    exchange.
    #FAX
    Do not use.
    #SCAN
    These setting items are for image adjustment in scanning.
    #PRINT
    These setting items are for image adjustment in printer assembly and for special mode for the
    field-related measures.
    #NETWORK
    Use it to confirm the contents of the installed CA certificates.
    #CODEC
    This is a setting items related to CODEC.
    #SYSTEM
    This is a setting items related to SYSTEM.
    #ACC
    Register the accessories.
    #COUNTER
    Use it to check estimates for maintenance/parts replacement.
    #LMS
    Use it to set the inactivity of the transmitted license and the license inactivity without
    transmitting.
    #E-RDS
    This is a setting items related to e-RDS (Embedded RDS).
    #REPORT
    Use it to generate reports on various service data.
    #DOWNLOAD
    Use it to download firmware to the ROM of a PCB in question.
    #CLEAR
    Use it to reset various data to initial settings.
    #DISPLAY
    The error and detailed code which have happened now are displayed.
    Display the engine speed of the main controller PCB.
    #ROM
    Displays ROM information, such as version numbers and checksums.
    #TEST MODE
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #13
    Hariprasath
    Guest

    Red face Re: Canon IR2520 Start up

    Can any body to help me to adjust the copy quality in canon ir 2525 service mode

  4. #14
    Service Manager 10,000+ Posts
    Canon IR2520 Start up

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR2520 Start up

    Quote Originally Posted by Hariprasath View Post
    Can any body to help me to adjust the copy quality in canon ir 2525 service mode


    best to stay out of service mode if u have no working knowledge on product

    describe your CQ issue----
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here