ir6000 trouble

[bakaoni666]

thanks...i've already checked the serial and it was iR5000.

[teckat]

Training was AGES ago,,, but as I recall, only real difference is Main controller, and possibly DC-controller. But I am not willing to testify to that

all PCB's are the same in the iR5000/6000 , I just checked. so how does the main engine differ between 50cpm & 60cpm/ ??? I remember something with the DIMM ago

[teckat]

thanks...i've already checked the serial and it was iR5000.

from checking / all the parts are the same even the PCB's

[davidj7]

teckat an ir5000 can run at 60 cpm just like a 330 can run at 40 cpm . There are ways to do it ..........

[ymmtech]

Have to take out main board, compare wire/jumper.

[teckat]

teckat an ir5000 can run at 60 cpm just like a 330 can run at 40 cpm . There are ways to do it ..........

thanks for info/ but but as a tech, i do not care about what a customer has to say about speed or cpm's/ or if they use a stop watch. once they complain about cpm's i give them Canon's # and call my sales person.

[davidj7]

teckat: I have timed my machies and it prints a4 according to what canon says. I have timed right from 405 to 105+ only one i havent timed is a 3530 or somthing i got 2 days back

[teckat]

teckat: I have timed my machies and it prints a4 according to what canon says. I have timed right from 405 to 105+ only one i havent timed is a 3530 or somthing i got 2 days back

when u deal with companies that have 15/20 imageRunners -on one floor there are many things that can effect a copiers print speed when connected to a network/ not all networks are set up to optimize correctly/ as in hubs & switches

[teckat]

Have to take out main board, compare wire/jumper.

both ir5000/& 6000 have same main controller part #/ if fact both machines have all the same part numbers (go figure)

[ymmtech]

That is why I say jumper makes the treat.