Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,650
    Rep Power
    57

    IR 105 with K2 finisher

    After printed 20 sets of some document get message to remove paper from booklet tray and customer must cancel curent print job.
    Finisher tray is not full.
    Have option on screen to cancel current job or to use some other function (scan, copy).
    No fault code.
    Finisher work normaly when copy.

  2. #2
    Service Manager 10,000+ Posts
    IR 105 with K2 finisher

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by xcopytech View Post
    After printed 20 sets of some document get message to remove paper from booklet tray and customer must cancel curent print job.
    Finisher tray is not full.
    Have option on screen to cancel current job or to use some other function (scan, copy).
    No fault code.
    Finisher work normaly when copy.
    stuck sensor arm/or broken arm

    Sensors PI17 or PI20 can cause this problem. PI17 is tray B paper detection and PI20 is tray A paper detection. When the fault occurs, the sensors can be checked in service mode at Copier>I/O>Sorter.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here