Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 38
  1. #21
    Service Manager 10,000+ Posts
    Canon C1 drum question

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon C1 drum question

    Quote Originally Posted by CopySirigu View Post
    Olá, sou novo aqui, estou com esse problema na image Press C1, já foi substituido cilindro mas continua saindo a mesma falha. Espero que possam me ajudar. Obrigado. Attachment 37682
    Hi, I'm new here, I'm having this problem in image Press C1, I've already replaced cylinder but it still comes out the same fault. I hope you can help me. Thank you.


    Did u check or replace the ITB?
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  2. #22
    Junior Member
    Join Date
    Sep 2017
    Location
    UMUARAMA-PARANÁ
    Posts
    8
    Rep Power
    0

    Re: Canon C1 drum question

    Você verificou ou substituiu o ITB? [/ QUOTE]

    Sim,ja foi substituído, tenho outra maquina aqui.

    Quando substituí o cilindro por um novo essa falha havia desaparecido, mas depois de umas 100 impressões retornou.

    Substituí tambem as unidades reveladoras, placas hvt, dc controller, sensor de potencial do cilindro, todos sem resultado.

  3. #23
    Service Manager 10,000+ Posts
    Canon C1 drum question

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon C1 drum question

    ps test.jpg




    Does the issue stay in same place ????

    O problema fica no mesmo lugar?
    -------------------------------------------------

    what cylinder did u replace ??
    --------------------
    Que cilindro você substituiu?
    ----------------------------------------------------------

    you need to remove all developer cylinders / and inspect turret with a flashlight for any dirt,

    and you need to clean inside that turret on all changes.
    -------------------------------------------------
    você precisa remover todos os cilindros do desenvolvedor / e inspecionar a torreta com uma lanterna para qualquer sujeira,

    e você precisa limpar dentro dessa torre em todas as
    mudanças.

    Last edited by teckat; 09-21-2017 at 07:33 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #24
    Junior Member
    Join Date
    Sep 2017
    Location
    UMUARAMA-PARANÁ
    Posts
    8
    Rep Power
    0

    Re: Canon C1 drum question

    [QUOTE = teckat; 577723]




    O problema fica no mesmo lugar ????

    O problema fica no mesmo lugar?
    ------------------------------------------------- o
    NÃO FICA NO MESMO LUGAR

    que cilindro você substituiu?

    IMAGE DRUM


    [/CITAR]

  5. #25
    Service Manager 10,000+ Posts
    Canon C1 drum question

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon C1 drum question

    then you need to remove all developer cylinders / and inspect developing rotary turret with a flashlight for any dirt,

    and you need to clean inside that ROTARY on all changes.
    -------------------------------------------------

    Canon C1 drum question-rotary-jpg
    Attached Images Attached Images
    Last edited by teckat; 09-28-2017 at 03:27 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #26
    Junior Member
    Join Date
    Sep 2017
    Location
    UMUARAMA-PARANÁ
    Posts
    8
    Rep Power
    0

    Re: Canon C1 drum question

    Boa tarde Sr. Teckat, fiz os procedimentos a que me instruiu, mas sem resultados.
    Porém quando desligo PO_CNT para 0, não apresenta o problema.
    Muito obrigado pela disposição em me ajudar.

  7. #27
    Service Manager 10,000+ Posts
    Canon C1 drum question

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon C1 drum question

    Quote Originally Posted by CopySirigu View Post
    Boa tarde Sr. Teckat, fiz os procedimentos a que me instruiu, mas sem resultados.
    Porém quando desligo PO_CNT para 0, não apresenta o problema.
    Muito obrigado pela disposição em me ajudar.



    Potential Control should remain "ON"
    Off is for testing printer CQ issues.

    NOTE: Turning Potential Control off is for testing purposes only. If left off color accuracy will suffer and E061 will occur.

    Your DC Controller PCB) or Potential Sensor
    could be at fault
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #28
    Junior Member
    Join Date
    Sep 2017
    Location
    UMUARAMA-PARANÁ
    Posts
    8
    Rep Power
    0

    Re: Canon C1 drum question

    Controle de Potencial foi desligado para teste mesmo.

    DC Controler PCB e Sensor de Potencial também já foram substituídos, porém sem resultados.

  9. #29
    Service Manager 10,000+ Posts
    Canon C1 drum question

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon C1 drum question




    Check that the Developer Unit Fixed Arms (plastic arms on either side of the Developing Unit that screw down to hold the unit in place) are screwed down securely.

    Image shown > these lines are in Paper Feed Direction

    what shows on single color PG 5 test prints

    do lines move down paper on continuous prints
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #30
    Junior Member
    Join Date
    Sep 2017
    Location
    UMUARAMA-PARANÁ
    Posts
    8
    Rep Power
    0

    Re: Canon C1 drum question

    IMG_20171010_173031173_HDR.jpgIMG_20171010_173743446_HDR.jpgimpressões em formato a4.


    A foto anterior estava em a4-r.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here