Canon IR 105 and 105+ M2 and M3 Fiery Problem!

[teckat]

I can not access the setup mode of Imagepass-M2. I can not access through the selection keys. The key sequence does not work when pressing for Network setup and TCP / IP configuration.
Thank you for your help!

---

**Before attaching the imagePASS-M2 to an imageRUNNER-7200/8500/85/105.

In the service mode of the imageRUNNER, please make the following setting:
Copier>Option>INT-FACE>IMG-CONT to "4"

Power off Printer

Connect M2 Power Cord
Connect M2 to Printer (Copier interface cable )
Power up Printer
Power up M2

Now do the M2 Set up
Then Print Config Page







I

[Marcos RC]

Thank you, friend, I was able to connect with your help!
I had long since stopped working as a technician, and I did not remember the procedure anymore.
MAY GOD BLESS YOU!

[teckat]

Thank you, friend, I was able to connect with your help!
I had long since stopped working as a technician, and I did not remember the procedure anymore.
MAY GOD BLESS YOU!

---

Thanks_Pizza Man .jpgwelcome