Quote Originally Posted by POTOTEA
Hi, I have a Canon ir C3220N which won't seem to print. Let me start by saying I am a home user & bought this printer off Ebay for my mother in law who is starting up a publishing company.

When I attempt to print something, I can see the job in the printer queue but after about 1-2 minutes I get a "document failed to print" message with no other specific error message. The photo copy feature works ok so mechanically I am assuming the printer is ok?

The printer is on my router & I can access the Fiery page using my web browser.

Here is the printer config:

diablo: 2.4.17-11_jULY_2003
Disk: EXT2-R0-IDE-11_JUL_2003
Kernel:2.4.17-11_jULY_2003
base: 3_0-11_July_2003
CONVERT-3_0-R0-11_July_2003
Platform: MXi-11_JUL_2003
LCD-eth: 03_JAN_2003

Service Mode settings
Display Version
DC-CON 32.02
R-CON 04.01
PANEL 00.02
ECO 41.08
FEEDER 05.01
SORTER 04.01
FAX ___
NIB 04.00
PS/PCL --.--
LIPS --.--
SDL-STCH 03.01
OP-CON 03.01
MN-CONT 78.01
BOOT-ROM 70.01N
DIAG-DVC --.--
RUI 77.02
MEAP 75.02

Option> BODY
MODEL-SZ 2
PASCAL 1
DLIFE-SW 0
CONFIG NL en . 00 . 02
TEMP-TBL 0
W/SCNR 1
RUI-DSP 0
NW-SPEED 0
ADJ-LVL 0
INTROT-1 100
INTROT-2 500
INTROT-T 10
DEVL-PTH 2
AUTO-DH 1
ENVP-DH 1
ENVP-INT 60
CNTR-DSP 0
BASE-SW 1
Option>ACC
COIN 0
DK-P 0
CARD-SW 0
USB-MSK 0
Option>IMG-FACE
IMG-CONT 3

If anyone is able to offer any advice of what to try, I really would appr4eciate this as I am tearing my hair out now
You don't have the PS/PCL drivers installed on the copier. Call a technician to come out and install the latest networked firmware using SST.