canon ir 6800 cn error code

[redzx]

hello guy.. i wanna to know what the mean of E000070-0102 error code??
my machine is break down now..
i'm appreciate all your help =)

[copy_suhail]

E070-0101/E070-0102/E070-0201/E070-0202/E070-0302 Error Code

If the grounding spring found inside the intermediate transfer assembly becomes deformed, the resulting static noise can cause the ITB home position sensor to
malfunction.
The grounding spring may have become deformed when a part inside the intermediate transfer assembly was replaced.

Field Remedy

Check the following contacts of the grounding spring. If any of these contacts is deformed and, thus, the electrical conductivity is poor, correct the spring:
1 contact with the end of the primary transfer upstream roller
2 contact with the edge of the plate
3 contact with a plate around the secondary transfer assembly
4 contact with a plate around the secondary transfer assembly
5 contact with the secondary upstream roller
6 contact with the secondary transfer inside roller

7 contact with the primary transfer downstream roller

[SCREWTAPE]

Pull out the ITB ass'y and check for damage.
Check the belt. Are you a tech, if not call for service at
you nearest Canon dealer.

[anothertech]

Clean the white patches on the inside of the transfer belt.

[redzx]

t hanks 4 all.. i alredy fix that problm.. =)

[SCREWTAPE]

So what was it??

[redzx]

i'm open all the part.. and service all the unit..
transfer belt n film..

[teckat]

i'm open all the part.. and service all the unit..
transfer belt n film..

set up a maintenance program on your machines/ prevents > most service headaches !!