Canon Color IRC3220 Copier - Messed up power cable

[tampajim]

Hello,

I was moving my copier, and when we picked it up...the bottom section fell away from the main section.

One of the power cables become damaged.

I need to know which of the 4 holes does the yellow cable go in.

photo..jpg
Would it be top left, top right, bottom left, or bottom right from this photo?

photo2..jpg

It's the plug that goes in this bottom slot.

photo 3..jpg
This is what it looked like before I connected the 2 parts I could figure out.

Thanks to anyone that can help me!

Jim

[mrfixit51]

Not being a smart ass here, but did you think to remove mating connector to ascertain which port the single wire plug needed to go into?

[teckat]

Hello,

I was moving my copier, and when we picked it up...the bottom section fell away from the main section.

One of the power cables become damaged.

I need to know which of the 4 holes does the yellow cable go in.

photo..jpg
Would it be top left, top right, bottom left, or bottom right from this photo?

photo2..jpg

It's the plug that goes in this bottom slot.

photo 3..jpg
This is what it looked like before I connected the 2 parts I could figure out.

Thanks to anyone that can help me!

Jim

mrfixit51 has the right move >remove that metal cover/ remove plug/ check back side/ setup

that Cassette Feeding Unit-X1 PLUG J950 goes to the DController / part # for new FG3-2454-000 CABLE, INTERFACE

[tampajim]

Not being a smart ass here, but did you think to remove mating connector to ascertain which port the single wire plug needed to go into?

LOL. Not a smart ass response at all. Any advice and help is greatly appreciated.

When you say the "mating connector" are you referring to the part on the machine that the cable connects too?

I ask this because the other end of this cable isn't the same.

[tampajim]

mrfixit51 has the right move >remove that metal cover/ remove plug/ check back side/ setup

that Cassette Feeding Unit-X1 PLUG J950 goes to the DController / part # for new FG3-2454-000 CABLE, INTERFACE

Thanks! Any idea where I can buy this part? I tried googling it, and didn't have much luck sifting through the responses.

Jim

[teckat]

Thanks! Any idea where I can buy this part? I tried googling it, and didn't have much luck sifting through the responses.

Jim

photo2...jpg


Call a Canon Office or 1-800-528-2380

[tampajim]

photo2...jpg


Call a Canon Office or 1-800-528-2380

Thanks so much for you guy's help! I simply didn't think to do something like this. I will give this a try tomorrow. If this doesn't work, then I will get on the phone with Canon and order the part that you so provided me with the info on. Again, I would have NEVER been able to even figure out what the name of the part was or what it did to even start ordering it.

What an awesome resource this site is, and it's because people like you guys take the time to help out someone in need like myself.

Jim

[teckat]

U should have no problem ordering it/ if u do, call an Authorized Canon Dealer in your area to order , it may be faster.

I once had a truck driver cut that cable in half, when he was putting the machine on the cassette feed unit.

[mrfixit51]

You are welcome...

[teckat]

Thanks so much for you guy's help! I simply didn't think to do something like this. I will give this a try tomorrow. If this doesn't work, then I will get on the phone with Canon and order the part that you so provided me with the info on. Again, I would have NEVER been able to even figure out what the name of the part was or what it did to even start ordering it.

What an awesome resource this site is, and it's because people like you guys take the time to help out someone in need like myself.

Jim

if u are not a tech/ place a service call to an Authorized Canon Dealer > to have it replace