Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Dec 2009
    Posts
    45
    Post Thanks / Like
    Rep Power
    0

    E000064-0000 canon ir3300 error result

    I face thos problem. how to solve it?


  2. #2
    Senior Tech 500+ Posts kuby's Avatar
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    555
    Post Thanks / Like
    Rep Power
    20
    Check power supply - replace if necessary..

    E064 Power supply voltage error
    (high-voltage error)



  3. #3
    Field Supervisor 5,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    12,687
    Post Thanks / Like
    Rep Power
    163
    Quote Originally Posted by kkwong0209 View Post
    I face thos problem. how to solve it?
    to add on to kuby's response also>

    Make sure the Developing bias value is set incorrectly.
    Check the setting of COPIER>ADJUST>DEVELOP>DE-DC in service mode. Compare this value with that of the service label. If the setting is found to be out of adjustment, set the value back to door specifications. After making the adjustments, run some continuous copies to check for occurrence of the code. Since this value is maintained by the DCON the same adjustment is required after replacement of the DC controller.


  4. #4
    Tech Specialist 1,000+ Posts
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,150
    Post Thanks / Like
    Rep Power
    27
    Make sure that the transfer roller hasn't popped out of place


  5. #5
    Field Supervisor 5,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    12,687
    Post Thanks / Like
    Rep Power
    163
    to add on
    Check that the Pressure Plates (Leaf Springs) for the Transport Section are in good condition and making good contact with the Transport Bed.leaf..jpg


  6. #6
    Field Supervisor 1,000+ Posts


    davidj7's Avatar
    Join Date
    Jan 2009
    Location
    india
    Posts
    1,048
    Post Thanks / Like
    Rep Power
    24
    i ve had to replace transfer roller for this issue couple of times.

    a machine is only as good as your tech : source:screwtape ; the scary one

  7. #7
    Technician bahgat mohamed's Avatar
    Join Date
    Jun 2009
    Location
    alexandrea,egypt
    Posts
    17
    Post Thanks / Like
    Rep Power
    11
    if the drum leaks it also makes E64 ,so replace it if deteriorated.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here