POP Authentication before Send= OFF
<OFF>: Does not use an SMTP server that requires POP before
SMTP.
<ON>: Uses an SMTP server that requires POP before SMTP
(method for authenticating users who have logged in the POP
server before sending e-mail).
SMTP Authentication=ON
If you use an SMTP server that does not require SMTP
authentication for sending e-mail, select <OFF>
I Don't see anything wrong ??
a tech sent me this/ i don't think it apply's to you/ if so there is a work around
If you connect the machine to a switching hub, it may not be able
to connect to a network even though your network settings are
set correctly.
This occurs because the spanning tree process performed
between switching hubs prevents them from communicating
with each other immediately after the machine connects to a
switching hub.
Bookmarks