Canon CLC 3200 Print Server taking so long to be ready.

[teckat]

Is the swapped panel working on other machine/ if so u may have had a poor connection on it ??

[SCREWTAPE]

I am not really sure what caused my LCD touch screen panel to go blank. I checked the contrast button and still no changes. I tried to swap the entire panel with another machine and the panel from the other machine worked. When I say entire panel I mean the whole thing with the LCD touch screen panel together with the number buttons and the start/copy buttons.

Ish happens

As Teckat mention maybe it was a bad connection.
Does the panel work on the other machine?

[maetsuen]

I was not really able to test the faulty panel with the other machine yesterday afternoon since the office was about to close.
Today I tested the faulty panel, I installed it to another machine and just the same the panel is not giving me anything.
I'm gonna have to wait a few days, the nearest Canon support team here in my area told me their gonna send me a working panel.

I'll keep you guys updated.
Thanks much for helping me out.

[teckat]

LCD's do crap out/ even if buttons are working/ had customers pounding & using pens and other objects on them.

[SCREWTAPE]

Had one the other day, the lcd was shot. You can see everything but it was not responsive. The buttons work however.

[teckat]

once had a customer using a letter opener on LCD/ don't have to say what it looked like/ they paid for Labor & Part even though they had a full contract/ Those Full contract customers think they can get away with murdering a machine. Not with my company, we take pics of all customer damage, it keeps their billing agents mouth shut.

[Selin]

Sorry for bringing up such an old thread, but I have the same problem with my friend's Canon CLC-3200 + Fiery RIP. Canon cannot find the RIP: "Wait for a moment (check the power source of the print server behind the main unit and connection cable if the display doesn't change in a moment)."

Is it possible to connect Canon CLC-3200 to the PC directly? (bypassing Fiery)
Or, maybe, there is any chance to fix this problem somehow?

Unfortunately, the nearest service center is in 600+ km far from us And no chance to have some of specialists in our city.

I have some expiriance in fixing and repairing personal computers, so I hope to fix all hardware problem by myself. But I have no Service Manual and Software, Firmware, etc. for Fiery and CLC.

If someone can help me with this - I'll very appriciate that.

Thank you in advance.