canon irc3220

[DadO]

I finally solved my problem whit registration. After adjusting lasers....clearing dcon/rcon/mcon....cleaning+testing ITB drive and assy problem was in patch reader NOT FULLY OPEN so it couldn't read chevrons (as someone ilustrated ) during image stabilization at start-up.

When u open door, u have small pin that hits "+" sing on the machine and open the cover of patch reader (lol+omg+rolf+rolfmao ). In my anger that i collected during past 2 months i teared and broke the cover and now machine is working like a sunshine. Try this before sending machine to the smithereens ;-)

[teckat]

I finally solved my problem whit registration. After adjusting lasers....clearing dcon/rcon/mcon....cleaning+testing ITB drive and assy problem was in patch reader NOT FULLY OPEN so it couldn't read chevrons (as someone ilustrated ) during image stabilization at start-up.

When u open door, u have small pin that hits "+" sing on the machine and open the cover of patch reader (lol+omg+rolf+rolfmao ). In my anger that i collected during past 2 months i teared and broke the cover and now machine is working like a sunshine. Try this before sending machine to the smithereens ;-)

you did not post for the orig. problem here/ what printer are u talking about/ where did u post for help ??/ and on what issue

[copy_suhail]

what u talking about

[DadO]

CLC(IRC)2620-Need urgent help

I had same problem whit my CLC 2620. Here is the post.