hi, my copier (canoon IR 1600) shows : System error E000
how i can solve that problem?
Regards,
hi, my copier (canoon IR 1600) shows : System error E000
how i can solve that problem?
Regards,
Hello, sir. E001 is a high temp. error. My first advice would be to atempt to clear it in service mode:
If this does not help, on most units you have to start looking at your Fixing Assy. or Thermistors. Make sure that you do not have a piece of paper wrapped around Upper Fixing Roller or and other foreign substance in that area. However, on this one, I would recomend replacing Fix Assy. as a whole if you can, FG6-8326-000 (for s/n starting with MQT/MQV/MRV/MRW) or FG6-8325-000 (for all other s/n). Don't see p/n for Thermistors. Also, heard of alot of other board and p/s issues with this model that can cause E001-E004 errors. See if you can clear it first. Good luck. Let me know how you make out.
- Press ADDITIONAL FUNCTIONS, #
- Go to #7 Printer and press OK
- Go to #4 Printer Reset and press OK
- Yes = ( * )
- Power cycle unit.
I have also this problem.
Can you help me
hi
i got this error b4 e000 means low temperature so you have a problem in the fuser unit>
check thermo lamp, thermistor in the fuser unit and then reset the machine.
i advise u to visit CANON PHOTOCOPIER UK Error Codes
The above mentioned link is dead now. Updated link is here:
E000 Reset Procedure
Bookmarks