Paper stop beforere registration roller.
Jam code 0218.
Registration roller do not rotate.
Replaced registration and registration brake clutch but still same.
Main motor M1 work good.
Paper stop beforere registration roller.
Jam code 0218.
Registration roller do not rotate.
Replaced registration and registration brake clutch but still same.
Main motor M1 work good.
old pub
The spring (FS5-2978-000) on the main drive had slipped over the coupling (FB6-0581-000) causing no drive to the registration rollers. Repositioning the spring resolved the jamming problem.
000000800200_Figur&#.JPG
other pub> when copying only-
When copying from the original glass or document feeder, the copy paper will feed to the registration roller and stop. The machine will continue to rotate but the paper will not feed. The unit will have to be shut down to reset the malfunction. This issue only occurs when copying.
Solution :
Check for a loose connection at the DDI-S interface cable. This cable connects the main controller cage to the reader controller.
IMG_2570_edited_1..jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
One other thing to look at is the inlet guide. It gets deformed and the guides pinch together so that there isn't enough clearance for a sheet of paper.
But is sounds more likely to be what teckat posted
This code is for PS60 image write start sensor. Jam code 0218 can be caused by CL5 and the registration clutch. Check PS60 flag for cuts and also putting a extra wrap on the sensor flag can resolve the jam code.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Pic of CL5
IN MULTI FEED DRIVE ASSEMBLY
000000800200_Figur&#.JPG
FH6-5016-020= CL5
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Thanks to all, problem was spring on main drive.
Now have second problem.
When copy or print A3 everything is ok, but when copy or print A4, machine print 30-40 pages ok and then jam with half image on paper.
It is look like registration problem, but registration and registration brake clutches are new.
jam code is 010A
No duplexing.
Simplex print or copy. Paper stop on transport belts.
When jam, on print no lead edge margine and have about half image on paper.
A3 print or copy OK.
Bookmarks