Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Technician abbas's Avatar
    Join Date
    Jan 2010
    Location
    united arab emirates
    Posts
    39
    Rep Power
    29

    IRC3220 Colour Adjustment

    Pls HElp... Very Urgent...
    I'm in a troublewith the colour adjustment of Canon IRC 3220 machine using service mode.
    any pls help me...
    its quite very urgent

    pllsssss....pllsssss...

  2. #2
    Service Manager 100+ Posts
    Join Date
    Jan 2010
    Location
    China
    Posts
    214
    Rep Power
    0
    Here is one simple adjustment that you can try. Step 1 - Press * ( Additional Function ), Step 2- Select Auto Gradation Adjustment , Step 3 - Select Full Adjustment, And then you follow it instruction until Finished. It would be better if you attach the copy for reference.

  3. #3
    Service Manager 10,000+ Posts
    IRC3220 Colour Adjustment

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by abbas View Post
    Pls HElp... Very Urgent...
    I'm in a troublewith the colour adjustment of Canon IRC 3220 machine using service mode.
    any pls help me...
    its quite very urgent

    pllsssss....pllsssss...

    if u have a Fiery connected/ use the Kodak gray scale/ procedure- under Printer tab


    what are your Color image issues ??


    color quality/blur/faded/missing color/light/dark/ ????
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    East Coast Imaging 2,500+ Posts
    IRC3220 Colour Adjustment

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    If your values are off in service mode for your color, check out your service mode values from the door. There should be a couple of sheets behind the panel that's on your front door.
    Do not make any adjustments for your color in service mode if your not quite sure about what your doing.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  5. #5
    Service Manager 10,000+ Posts
    IRC3220 Colour Adjustment

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    color-wheel-subt&#11.jpg

    ADDED NOTE:
    The tiny yellow dots that appear on documents produced by many color laser printers and copiers. These yellow dots form a coded pattern on every page the printer produces and can be used to identify specific details about a document; for example, the brand, model, and serial number of the device that printed it and when it was printed. In short, the printer dots are a surveillance tool that can link each printed page to the printer that printed it.

    guide..JPG
    Computer graphics software is used to overlay the black dots in the microscope image with larger yellow dots for greater visibility. iRC3200/3220 has yellow dots
    spy-vs-spy_tofu_&#11.JPG

    The top most row and left most column are a parity row and column for error correction. They help verify that the forensic information has been read accurately (and, if a single dot has been read incorrectly, to identify the location of the error). The rows and columns all have odd parity: that is, every column contains an odd number of dots, and every row (except the topmost row) contains an odd number of dots. If any row or column appears to contain an even number of dots, it has been read incorrectly.
    Each column is read top-to-bottom as a single byte of seven bits (omitting the first parity bit); the bytes are then read right-to-left. The columns (which we have chosen to number from left to right) have the following meanings:

    • 15: unknown (often zero; constant for each individual printer; may convey some non-user-visible fact about the printer's model or configuration)
    • 14, 13, 12, 11: printer serial number in binary-coded-decimal, two digits per byte (constant for each individual printer; see below)
    • 10: separator (typically all ones; does not appear to code information)
    • 9: unused
    • 8: year that page was printed (without century; 2005 is coded as 5)
    • 7: month that page was printed
    • 6: day that page was printed
    • 5: hour that page was printed (may be UTC time zone, or may be set inaccurately within printer)
    • 4, 3: unused
    • 2: minute that page was printed
    • 1: row parity bit (set to guarantee an odd number of dots present per row)

    The printer serial number is a decimal number of six or eight digits; these digits are coded two at a time in columns 14, 13, 12, and 11 (or possibly just 13, 12, and 11); for instance, the serial number 00654321 would be coded with column values 00, 65, 43, and 21.
    Last edited by teckat; 05-10-2010 at 01:19 AM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    East Coast Imaging 2,500+ Posts
    IRC3220 Colour Adjustment

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    I should've ask. Are you having registration issues. Are your colors not uniform.
    Attached Images Attached Images
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  7. #7
    clc1000
    Guest

    color registration problem

    deassembly all 4 laser unit turn the lens mover motor gear to see start point at the hole on the motor install plate, then reassemly all 4 laser unit turn on copier make auto gradation full adjust

  8. #8
    Service Manager 10,000+ Posts
    IRC3220 Colour Adjustment

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by clc1000 View Post
    deassembly all 4 laser unit turn the lens mover motor gear to see start point at the hole on the motor install plate, then reassemly all 4 laser unit turn on copier make auto gradation full adjust

    you are replying to a post that is over two months old

    Head-Bang..JPG
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Apr 2009
    Location
    Landskrona
    Posts
    52
    Rep Power
    31
    Clean the itb driveroller.
    Take out the itb and clean the belt insida and the drive rollers.

  10. #10
    Service Manager 10,000+ Posts
    IRC3220 Colour Adjustment

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by Kapten View Post
    Clean the itb driveroller.
    Take out the itb and clean the belt insida and the drive rollers.


    look at original post date/ over two months old> 5-09-2010

    abbas has left the building
    /
    ELVIS..jpg
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here