Canon IR105+ grey background....please help me!

[SCREWTAPE]

Look at blowing the potential control sensor. Or as stated just turn it off and adjust Dev setting to compensate. Blowing it clean is best.

I believe he tried this already.

Compensate what from the dev, the bias??

[teckat]

Look at blowing the potential control sensor. Or as stated just turn it off and adjust dev setting to compensate. Blowing it clean is best.

be careful where u blow !!!!!!!!!!!!!!!!!
RSCL0049..jpg
theb1365..jpg

[tinnyjay]

be careful where u blow !!!!!!!!!!!!!!!!!
RSCL0049..jpg
theb1365..jpg

Lol...........

My IR105+ just does the reversed cycle of copying.
Instead of writing the black on the white,it write the white on the black
All the background set to black and writing(images) set to white!!!
My Canon has one new phrase " Black on the white"
Please help me to restore the phrase to the original one "Black on the white"

[D_L_P]

Well I didn't think it looked like wrong toner, usually copies are pretty crappy as well with the wrong toner but I will now reverse my opinion.
If toner is sticking where it shouldn't you have the wrong toner in there, like charges repel and opposites attract. Unless there has been some change in the laws of physics you will need to vacuum out every bit of toner out of the hopper and developer, put in the correct toner and either run 50 blank copies or do Copier->Function->Install->TONER-S. That is going to be a lot of toner on an ir105.


I had a similar experience with the wrong toner, scroll to the last post.

[teckat]

End users do get desperate when they run out of toner and a job must be printed, i can post some horror stories but it would take up too much space .

[tinnyjay]

Ens users do get desperate when they run out of toner and a job must be printed, i can post some horror stories but it would take up too much space .

Why you dont talk with Alfred Hitchcock?
He can make a good horror movie based on your stories.

[teckat]

Why you dont talk with Alfred Hitchcock?
He can make a good horror movie based on your stories.

horror..jpg
what about customers using/spooning XEROX toner in Canon Printers/
how about customers using waste toner to refill for Canon black /
and i don't want to leave out end users using pouring developer/starter in to hopper ports on CLc's/
even had a customer poor oil in the hopper /

[20YRSEXP]

1) is the drum heater on? with a piece of paper covering your hand to protect the drum from the oils on your skin, feel the drum and see if it is warm.
2) is the pre-conditioning lamp coming on? with the inner cover off watch to the left of the primary assembly while the copier runs. Can you see light coming from inside?

[SCREWTAPE]

horror..jpg
what about customers using/spooning XEROX toner in Canon Printers/
how about customers using waste toner to refill for Canon black /
and i don't want to leave out end users using pouring developer/starter in to hopper ports on CLc's/
even had a customer poor oil in the hopper /

Waste toner as a refill, wow!

[teckat]

yeah' u meet them all in the big city/

showing my age but u must remember the NP120-125's/ some idiots would poor the waste box toner in the toner supply slot/ it turned the dev unit rock hard/ they paid thru the nose/

the other idiots at our formed Staples accts. would spoon XEROX toner in to the Canon B & W machines/ it would drive techs crazy for a week

all techs now carry
bs..jpg
Button~~~~~~~~~~~~~~~~~~~~