Canon IR105+ grey background....please help me!

[teckat]

message says Web is Low> not replace Web !

it has taken two days for poster to inspect printer

[SCREWTAPE]

just a thought.....maybe, the web is really done and need replacing? before ressetting the counters have at least a look at the web

If the web is done there would be a E005.

[Herrmann]

If the web is done there would be a E005

absolutely right, screw, but i would suggest to replace it before the e005 appears, thereby leaving the mashine useless until a technician shows up. I and You (i am sure) know murphy, and critical calls always appear friday afternoon, ruining your start in the weekend , so, if in doubt, replace it, its only 15 euros (12 dollars, i think) and avoid trouble.

[SCREWTAPE]

absolutely right, screw, but i would suggest to replace it before the e005 appears, thereby leaving the mashine useless until a technician shows up. I and You (i am sure) know murphy, and critical calls always appear friday afternoon, ruining your start in the weekend , so, if in doubt, replace it, its only 15 euros (12 dollars, i think) and avoid trouble.

I hear that..

[tinnyjay]

I just searched for Fixin Unit Error in Service Manual,but there is nothing about this.
As you say,this can be connected with Fixing Web is Low.
I will change Fixing Web and i'll show you the results.
I can buy Cleaning Web for only 30 Euro here in Albania and by the way,i need to buy parts and toners for Canon,Ricoh and Toshiba in Europe cheaper than i really buy here in Albania.
Who can help me with this

[mrfixit51]

I just searched for Fixin Unit Error in Service Manual,but there is nothing about this.

You have stated that the message appears in the R.U.I.,, The service manual does not cover anything to do with messages shown on the R.U.I. screen. Some messages such as Web Low, or Empty Waste Toner, do not show right away on the operators screen, but when entering Service Mode, they will pop up in that window. Just the nature of the beast. We have asked repeatedly for you to go to the copier and investigate the web low condition first hand. If the copier is running, then this is what I believe is occurring.