I have IR 2116J control Panel jamming... It cannot be reset by disconnect and reconnect the cables of
the counter control PCB and Main control PCB. Do anyone have any ideas how to solve the problem?
Thanks in advance.
I have IR 2116J control Panel jamming... It cannot be reset by disconnect and reconnect the cables of
the counter control PCB and Main control PCB. Do anyone have any ideas how to solve the problem?
Thanks in advance.
I'm having a hard time understanding your comment.
Last edited by SCREWTAPE; 05-19-2010 at 04:55 AM. Reason: AAAAAAAAAAAAAA
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Control Panel Lockup
display shows normally but the buttons are non-responsive.
problem can be caused by a faulty Fax Panel PCB. To determine if this is the problem, the optional Fax Panel can be disconnected by unplugging the flat cable (highlighted below in red) between it and the Operation Panel PCB. The machine should work normally with this cable removed.
cp5..jpg
Or >>> if the start button will lock up all buttons and functions of the touch screen.
Replace the IP Board
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Thanks for Mr. Teckat reply. You are right to say that the display shows normally but the buttons are non-responsive. This machine is used for
copying only, not connected to computer and fax. I will try to check again.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
it is a tough place in here
int..jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Sometimes I wonder!
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Sorry my english not very well :~)
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Bookmarks