Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11
    Trusted Tech 50+ Posts downhiller67's Avatar
    Join Date
    May 2010
    Location
    Davao City, Philippines
    Posts
    67
    Rep Power
    29
    Quote Originally Posted by smiley View Post
    the main cause why color displacement happend its because of an old drum.look at your drum life at service mode.
    where i could find this service mode?

    thank you.

  2. #12
    Service Manager 10,000+ Posts
    blurry print output on my canon ir c3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by downhiller67 View Post
    where i could find this service mode?

    thank you.

    (ITB) INTERMEDIATE TRANSFER BELT ASSEMBLY

    FN1424110200_Figur&#.JPG
    see this part above /this is why u need a tech


    check your PM
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #13
    Trusted Tech 50+ Posts downhiller67's Avatar
    Join Date
    May 2010
    Location
    Davao City, Philippines
    Posts
    67
    Rep Power
    29
    Quote Originally Posted by teckat View Post
    There may be a problem with the ITB drive assembly. Make sure the updated ITB drive assembly and gear have been installed.

    The transfer belt may be slipping on its drive rollers. Try removing the transfer belt cleaning blade and running a couple of copies, if the problem goes away the transfer belt is definitely slipping. Remove the ITB assembly and the transfer belt and clean all drive rollers with alcohol, also be sure to clean inside the transfer belt. (It is still possible the transfer belt may be slipping even if the problem does not go away after removing the cleaning blade so removing and cleaning the transfer belt drive rollers is still recommended).

    The pattern correction data stored in the DC Controller may be corrupt. Try clearing dc-con ram. You can run a test copy to see if the dc-con clear resolved the problem prior to inputting back up data. (Be sure you have run a PPrint: Copier/Function/MiscP/PPrint prior to performing any ram clears so back up data can be reentered).

    NOTE 2: If the color registration problem only occurs on HEAVY PAPER try setting service mode level 2, Copier/Option/Body/CLR-SHFT to 1. Keep in mind this will reduce heavy paper productivity by approximately 1/3.

    best to try and get a 3200 service manual/& give it to this Kyocera tech.
    thank you for the response, greatly appreciated, im trying to find out service manual for this machine.

  4. #14
    Trusted Tech 50+ Posts downhiller67's Avatar
    Join Date
    May 2010
    Location
    Davao City, Philippines
    Posts
    67
    Rep Power
    29
    i remove the itb blade and tried test print the pics are bit find but it has dirty background or maybe because it has no blade on it, question is it okey to hold or wipe the transfer belt?
    im going to disassemble the ITB by myself to clean the rollers, but a little bit hesitant due to the transfer belt.
    heres the output print. sorry i dont have digicam, low resulotion pix cause web cam use.
    Picture 001..jpg
    thank you very much

  5. #15
    Service Manager 10,000+ Posts
    blurry print output on my canon ir c3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by downhiller67 View Post
    i remove the itb blade and tried test print the pics are bit find but it has dirty background or maybe because it has no blade on it, question is it okey to hold or wipe the transfer belt?
    im going to disassemble the ITB by myself to clean the rollers, but a little bit hesitant due to the transfer belt.
    heres the output print. sorry i dont have digicam, low resulotion pix cause web cam use.
    Picture 001..jpg
    thank you very much


    get a manual before taking apart that ITB unit

    never run copies without the blade/

    u can clean belt> be careful> easy to damage

    i replace the blade unit every-time i replace ITB sheet or ITB unit
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #16
    Trusted Tech 50+ Posts downhiller67's Avatar
    Join Date
    May 2010
    Location
    Davao City, Philippines
    Posts
    67
    Rep Power
    29
    Quote Originally Posted by teckat View Post
    get a manual before taking apart that ITB unit

    never run copies without the blade/

    u can clean belt> be careful> easy to damage

    i replace the blade unit every-time i replace ITB sheet or ITB unit
    thank you so much sir, yes i made it! i disassemble the ITB unit and clean the ITB sheet in and out, ITB blade, rubber rollers, sponges rollers, and reassemble.
    test printed it and blurry is gone out, do you have any idea on how much ITB sheet and blade cost? i'm asking my supplier for this but no availability as of the moment

    thank you for your replies sir, now i know how to do it.
    Last edited by downhiller67; 05-25-2010 at 12:44 AM.

  7. #17
    Service Manager 10,000+ Posts
    blurry print output on my canon ir c3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by downhiller67 View Post
    thank you so much sir, yes i made it! i disassemble the ITB unit and clean the ITB sheet in and out, ITB blade, rubber rollers, sponges rollers, and reassemble.
    test printed it and blurry is gone out, do you have any idea on how much ITB sheet and blade cost? i'm asking my supplier for this but no availability as of the moment

    thank you for your replies sir, now i know how to do it.


    FG6-8942-130
    TRANSFER BELT ASSEMBLY = 700/800.00 US

    FB6-2930-000
    BELT, TRANSFER = 230.00 US

    FG6-8989-030
    TRANSFER CLEANING Blade unit
    = 50.00/60.00 US

    Search online or


    Contact Canon for prices in your country
    1. Customer Care Hotline: (632)884-9000
    2. Cebu Branch Office: (032) 233-5735, 2314165, 2333862, 2334165
    3. Davao Branch Office: (082) 226-2050, 2273820, 2278929
    4. La Union Branch Office: (072) 242-4587, (072) 242-4587
    5. Legaspi Branch Office: (052) 820-2083
    6. Pampanga Branch Office: (045) 961-8734
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #18
    Trusted Tech 50+ Posts downhiller67's Avatar
    Join Date
    May 2010
    Location
    Davao City, Philippines
    Posts
    67
    Rep Power
    29
    Quote Originally Posted by teckat View Post


    FG6-8942-130
    TRANSFER BELT ASSEMBLY = 700/800.00 US

    FB6-2930-000
    BELT, TRANSFER = 230.00 US

    FG6-8989-030
    TRANSFER CLEANING Blade unit
    = 50.00/60.00 US

    Search online or


    Contact Canon for prices in your country
    1. Customer Care Hotline: (632)884-9000
    2. Cebu Branch Office: (032) 233-5735, 2314165, 2333862, 2334165
    3. Davao Branch Office: (082) 226-2050, 2273820, 2278929
    4. La Union Branch Office: (072) 242-4587, (072) 242-4587
    5. Legaspi Branch Office: (052) 820-2083
    6. Pampanga Branch Office: (045) 961-8734

    thank you sir!!

  9. #19
    Service Manager 10,000+ Posts
    blurry print output on my canon ir c3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #20
    IT/PRINTER SUPPORT Tespc's Avatar
    Join Date
    Jul 2018
    Location
    SAN DIEGO
    Posts
    4
    Rep Power
    0

    Re: blurry print output on my canon ir c3200

    Quote Originally Posted by downhiller67 View Post
    hard to find canon tech in our place, rare colored copiers here, what does ITB stance for? i have technician friend but from kyocera, he is the one who maintain my kyocera copiers, maybe i could tell him about this.
    thank you for the reply.
    ITB=Intermediate Transfer Belt

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here