Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Trusted Tech 50+ Posts downhiller67's Avatar
    Join Date
    May 2010
    Location
    Davao City, Philippines
    Posts
    67
    Rep Power
    29

    blurry print output on my canon ir c3200

    i got a blurry print out on my canon ir c 3200, sometimes it doesn't give the right color, i made some auto gradation adjustment, full adjust, im not a technician myself. but i own a copy center business here in the Philippines. i bought this machine surplus from my importer friend.can some expert out there advice me on what t do on this machine please.

    thank you very much

  2. #2
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Posts
    117
    Rep Power
    30
    when you say blurry , are the colors out of alighment

  3. #3
    Service Manager 10,000+ Posts
    blurry print output on my canon ir c3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by downhiller67 View Post
    i got a blurry print out on my canon ir c 3200, sometimes it doesn't give the right color, i made some auto gradation adjustment, full adjust, im not a technician myself. but i own a copy center business here in the Philippines. i bought this machine surplus from my importer friend.can some expert out there advice me on what t do on this machine please.

    thank you very much

    u probably have an issue with the ITB unit/ on this model i would try to find a trained Canon tech/ the ITB unit is not something for an end user to handle
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    East Coast Imaging 2,500+ Posts
    blurry print output on my canon ir c3200

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    Or your lasers may need some manual adjusting.
    Check my thread, Tips on canon models
    There's some info regarding registration issues.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  5. #5
    Field Supervisor 500+ Posts smiley's Avatar
    Join Date
    Aug 2008
    Location
    manila
    Posts
    601
    Rep Power
    38
    the main cause why color displacement happend its because of an old drum.look at your drum life at service mode.
    there is no glory without sacrifice

  6. #6
    East Coast Imaging 2,500+ Posts
    blurry print output on my canon ir c3200

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    Quote Originally Posted by smiley View Post
    the main cause why color displacement happend its because of an old drum.look at your drum life at service mode.
    Bad drums can cause registration image faults
    But I have its not the main reason. There other factors
    that precisely play a bigger role with registration displacement.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  7. #7
    Trusted Tech 50+ Posts downhiller67's Avatar
    Join Date
    May 2010
    Location
    Davao City, Philippines
    Posts
    67
    Rep Power
    29
    yep,color out of alignment

  8. #8
    Trusted Tech 50+ Posts downhiller67's Avatar
    Join Date
    May 2010
    Location
    Davao City, Philippines
    Posts
    67
    Rep Power
    29
    Quote Originally Posted by teckat View Post
    u probably have an issue with the ITB unit/ on this model i would try to find a trained Canon tech/ the ITB unit is not something for an end user to handle
    hard to find canon tech in our place, rare colored copiers here, what does ITB stance for? i have technician friend but from kyocera, he is the one who maintain my kyocera copiers, maybe i could tell him about this.
    thank you for the reply.

  9. #9
    Service Manager 10,000+ Posts
    blurry print output on my canon ir c3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by smiley View Post
    the main cause why color displacement happend its because of an old drum.look at your drum life at service mode.
    poster stated> I'm not a tech ----the main cause for COLOR displacement-BLURRY & off COLOR in the 3200 series is >
    1. ITB UNIT
    2. LASER out of position(manual adjustment)
    3.Old Drum can cause quality issues/ Drum drive may cause displacement
    DCon clear works sometime/ only if machine has been serviced on a good schedule
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #10
    Service Manager 10,000+ Posts
    blurry print output on my canon ir c3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by downhiller67 View Post
    hard to find canon tech in our place, rare colored copiers here, what does ITB stance for? i have technician friend but from kyocera, he is the one who maintain my kyocera copiers, maybe i could tell him about this.
    thank you for the reply.

    There may be a problem with the ITB drive assembly. Make sure the updated ITB drive assembly and gear have been installed.

    The transfer belt may be slipping on its drive rollers. Try removing the transfer belt cleaning blade and running a couple of copies, if the problem goes away the transfer belt is definitely slipping. Remove the ITB assembly and the transfer belt and clean all drive rollers with alcohol, also be sure to clean inside the transfer belt. (It is still possible the transfer belt may be slipping even if the problem does not go away after removing the cleaning blade so removing and cleaning the transfer belt drive rollers is still recommended).

    The pattern correction data stored in the DC Controller may be corrupt. Try clearing dc-con ram. You can run a test copy to see if the dc-con clear resolved the problem prior to inputting back up data. (Be sure you have run a PPrint: Copier/Function/MiscP/PPrint prior to performing any ram clears so back up data can be reentered).

    NOTE 2: If the color registration problem only occurs on HEAVY PAPER try setting service mode level 2, Copier/Option/Body/CLR-SHFT to 1. Keep in mind this will reduce heavy paper productivity by approximately 1/3.

    best to try and get a 3200 service manual/& give it to this Kyocera tech.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here