Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 32
ir6000 E000002-0000
Hi gang,
A friend asked me if I could fix this, but I don't have a manual. Can anyone tell me what this code means? Thanks in advance!!!
-
E002 is the fuser did not reach 100 degrees.
Enter service mode then go copier-> function->clear->err. Hit ok and switch off/on at main power switch, the one on the right rear.
-
Check your thermistors as well, there probably dirty.
If the code does not go away, then replace them.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks