Help needed to setup imagePASS iR-M2 controller on iR105

[teckat]

poster needs the C Boot rom

[teckat]

I did test the crossover cable between a laptop and a pc and it works. Now there's a problem printing in our old setup, without M2 controller. The tech support from our head office now is afraid the controller has damaged hard- or firmware in our printer. We can ping printer, but not print to it (old situation as network printer, without M2 controller). Is there any specific (version) firmware needed on the iR105 to work with the M2 controller?

you need the C Boot rom/ to print with fiery

imageRUNNER 7200/8500/85/105 Copier Boot ROM Part Number>FG3-1715-000

The physical Boot ROM chip in an imageRUNNER 8500 is compliant with the Boot ROM Chip on the imageRUNNER 7200 and imageRUNNER 105. The chips are physically interchangeable between these copier models. The Boot ROM must be flashed to the proper version of firmware.

[rferdi91]

need help guys,, i have imagePASS-M2, when i connect it to iR105 it always comeout "connection established". i tried to wait but nothing happen