Our Canon imagePASS-C2 now can't communicate with its' ir C3220 copier/printer.
We can communicate through the network with the imagePASS-C2 controller, using Fiery's Command WorkStation 5.
We can, for example, clear the spooled print files on the controller's disk, but cannot reach the copier/printer from that utility.
The copier/printer cannot either establish a connection with the imagePASS-C2 controller.
We have played around with the 2 cables (both the cross-over etherNet cable, which we even changed, and the SCSI communication cable, of which we switched both ends), but to no avail.
We previously had a similar but intermittent problem which had been resolved by playing around with these cables, over a few days.
I have been suspecting a flaky etherNet connector on either end, but don't know how to validate this as the real source of the problem.
Maybe it is the SCSI cable or connectors ?
It is quite troublesome to lose access to this printer, as it is an important outlet for our architectural work.
Any ideas or suggestions would be quite welcome.
Serge
Bookmarks