Yes definately. It is required PM on time.
Yes definately. It is required PM on time.
good work
Thumbs up..jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Dear Frends,
Thank you very much for investing your time to reply me and read this query [whoever not able to reply].
One more question I would like to ask you that, if I try to open Remote UI of this machine through Internet Explorer, it is not opening, even after this machine is configured on TCP/IP. And everybody is firing their prints through configured TCP/IP no only from their comps. Somebody told me that to update the Firmware. But I am not able to find anywhere the said Firmware for this machine. If sombdoy has the same please let me know or mail me on my email ID pramod.patil1803@yahoo.co.in
Thanks and Regards,
PSP
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Yes I had done this as you said. But nothing has happened.
waiting for your reply.
Thanks
Turn off firewall
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I had already Turned off firwall in all comps and I m not able to find any firewall in this machine.
Please help....
its look u have a few problem..
1) check your drum unit, maybe your waste toner inside the drum unit is full or clog at cleaning blade area..
2)check your fuser..clean everything..
3)check mirror inside scanning area
4)if all above is not working, u need to open cover and take out laser unit..just clean laser unit, mostly poligon motor..
Bookmarks