Printing problem in Canon iR2016N, Pls help me.

**patil_ps** · 06-05-2010

Hi All,

I am facing a new problem in my Canon iR2016 N machine. If I fire prints or takes xerox copies from the machine, I am getting black thick line patch on the paper. It gives intermediately problem, not every time. Some times it comes fine and some times it gives problem. For your more information I am attaching the snapshot of the same herewith. I would request you all that to please go through it and help me.

I am waiting for your reply. Its very very urgent.

**SCREWTAPE** · 06-05-2010

Looks like a problem from your fusing unit. The fixing flim. FM2-3346-000

**Canuck** · 06-07-2010

Something in dev? arcing?

**patil_ps** · 06-07-2010

Originally Posted by Canuck

Something in dev? arcing?

Thank you very much to both 0f you for your reply.
As SCREWTAPE said Fuser problem, I tried to change Film only. But the problem was remaing same. So does it rquire to change the complete unit or only any one part? If any part is require to change like film, drum, blade or anything, then please let me know.
Also I want to know clear info abt DEV. What is the dev? arcing?
Request to you please reply me. Problem is still there.

**patil_ps** · 06-07-2010

Originally Posted by patil_ps

Thank you very much to both 0f you for your reply.
As SCREWTAPE said Fuser problem, I tried to change Film only. But the problem was remaing same. So does it rquire to change the complete unit or only any one part? If any part is require to change like film, drum, blade or anything, then please let me know.
Also I want to know clear info abt DEV. What is the dev? arcing?
Request to you please reply me. Problem is still there.

Somebody is saying that this problem might be with mirror and saying to clean it. Should I go throught it?

**mrfixit51** · 06-07-2010

It is not a mirror issue, it would affect all prints if that were the case. Arcing in the drum or the developer can cause the defect that you have provided. Look to the replacing/swapping of the drum or the developer to resolve your problem...

**patil_ps** · 06-07-2010

Hi,

Thank you very much to everyone for repling to help me.
I had tried lots of thing to resolve the issue. But I found the problem with Rod which is picking up the paper from the tray. There was lots of toner gathered on the Rod. Due to this reason, it was giving this type of problem. But still it is under observation and will inform you if any problem comes.

Thank you very mcuh.