Have iR 105+ with error code E744-4000 which not listed in service manual.
Parts have changed HDD and Boot Rom but still appear the same error code.
Any comment guys ?
Have iR 105+ with error code E744-4000 which not listed in service manual.
Parts have changed HDD and Boot Rom but still appear the same error code.
Any comment guys ?
This happens when the DC Controller DIMM from an iR105 is installed into either the iR9070 or iR105+.
Or did you swap the DC controller from the Ir105??
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
safety_no_brain..JPG
no swap allowed
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
You are right SCREWTAPE........problem solved
22533-Clipart-Ill.jpgSCREWTAPE's Bulb never goes out'
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Glad your up and running.
Before swapping or replacing PCBs
Check out the procedures that follow.
Teckat, your unique.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Well with the flames comin' off his head, the light is always present...
Bookmarks