Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
To zero the counter you must remove the counter pcb from the copier and then drill a small hole in the center of the board using a 1/4: drillbit. Then reinstall pcb. Spray the circuit board with machine oil prior to installing. While performing this procedure it helps to have a 9v battery with you and you must lick the battery contacts while performing this counter reset procedure. Very important--this reset must be done while completely naked!
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
LOL
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
Blaze, becareful with what you suggest my friend.
Its not good for buisness..
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Understood my friend...thanks- It was just a bit of humor ... resetting meters is criminal and idiotic but maybe my humor was a bit over the top. Its just that -----where are peoples integrity?
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
My suggestion would have involved a pair of Ruby Slippers, "There is no place like home".....
Thanks for the ROFL ---D_L_P ..glad someone enjoyed my attempt at humor. Most of the copier guys that work with me are really funny and the customers seem to like it. Thats not to say we're not professional but being playful does have its place.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
Bookmarks