imagePROGRAF L Printer Service Tool (Ver. 1.40)_ New

[teckat]

At the canon-asia website I only can find FUTs and I need to downgrade a IPF605.Thanks a lot.

==========;

L-Printer_Service_Tool_E_V1.50.zip

[paccome]

Thanks a lot but it´s the same file. It´s corrupt, I can´t open it, I tried with w7 and 7z compressor.Thanks.

[teckat]

send me your e-mail/ I will send u below/
u need 32bit or 64bit L PRINTER TOOL v1.70 ????????

this site is still having issues with attachments

[Quercus]

Hi,

Where is it possible to find the L-Printer service tool 1.7 (64bit)?

My IPF5000 drained most of the cartridges during the head cleaning today :--( ... 4 inks went from from 40% to empty :-( and a new MC was filled :-(

[teckat]

Hi,

Where is it possible to find the L-Printer service tool 1.7 (64bit)?

My IPF5000 drained most of the cartridges during the head cleaning today :--( ... 4 inks went from from 40% to empty :-( and a new MC was filled :-(

================================================== ===================

see attach
L Printer Service Tool Instructions.pdf

[Jerome67]

Hi Folks,

just worked my way through the whole thread but still no solution for my Problem :-(

I have teh Firmware update trouble on a W6200PG. Old PH broken and not responding, new one needs firmware update.

FUT says Printer must be in print mode. :-(

L Printer Tool doesn´t support the 6200 Printers.

Are there any other versions of the L-Printer tool which support the 6200 series ?

Regards

[teckat]

Hi Folks,

just worked my way through the whole thread but still no solution for my Problem :-(

I have teh Firmware update trouble on a W6200PG. Old PH broken and not responding, new one needs firmware update.

FUT says Printer must be in print mode. :-(

L Printer Tool doesn´t support the 6200 Printers.

Are there any other versions of the L-Printer tool which support the 6200 series ?

Regards

================================================== =============================


W6200 FIRMWARE //

Attachment 24635

USE GARO
Can this printer can use the GARO Firmware Update Tool to update the versions of the firmware for the system controller installed in the printer.
The GARO Firmware Update Tool is the same as the one for the user.

Available software for W6200
http://software.canon-europe.com/products/0010046.asp

[Jerome67]

I think you misunderstood me

I have the Firmware. It came with the new Printhead.

But the firmware Update Tool won´t let me do the update because the printer is in error state.

So to override the error state i need somthing like the L-Printer tool . But with support for the W6200

Greetings

[teckat]

I think you misunderstood me

I have the Firmware. It came with the new Printhead.

But the firmware Update Tool won´t let me do the update because the printer is in error state.

So to override the error state i need somthing like the L-Printer tool . But with support for the W6200

Greetings

-------------------------------
What PH Error are u getting ?

who says L PRINTER TOOL will not work on W6200 SERIES


Large Format Printers iPF500 / 510 / 600 / 605 / 610 / 650 / 655 / 700 / 710/
720/ 750 / 755 / 800 / 810 / 820 / 5000 / 5100 / 6100 / 6200 / 6300 / 8000 / 8000S / 8100 /
8300 / 9000 / 9000S / 9100 / W2200 / W2200S / W6200 / W6400 / W7200 / W7250 /
W8200 / W8400 / W8400D

Flash/Update firmware on a Wide Format Printer with the L Printer Tool

Before using the L Printer Tool it needs to be downloaded.
The firmware used to flash the printer also needs to be downloaded.
After the L Printer Tool is downloaded and unzipped open up the folder where the file
was unzipped to and double click the setup.exe file.

[uflorin32]

Can you help me with a copy of the software? I have a w8400 which starts and remains blocked in "Print head error" ... have cleaned the head, replaced some parts but still can't run over this error and I can't find the software.
Thank you in advance.