Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts dhanesh's Avatar
    Join Date
    Jun 2010
    Location
    Thiruvananthapuram, KERALA
    Posts
    63
    Rep Power
    0

    Lightbulb ERROR CODE 805 in IR 2016

    hi I HAVE AN IR 2016 MACHINE AN ERROR CODE SHOWN IN MY MACHINE ERROR 805 PLS SEND UR FEEDS
    DHANESH

  2. #2
    Senior Tech 100+ Posts
    ERROR CODE 805 in IR 2016

    songela's Avatar
    Join Date
    Mar 2008
    Location
    dar es salaam
    Posts
    215
    Rep Power
    35
    I suppose you should check the fans, there are hardly two of them,
    luck!

  3. #3
    Service Manager 1,000+ Posts
    ERROR CODE 805 in IR 2016

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo
    Posts
    1,311
    Rep Power
    49
    Fan failure

  4. #4
    Service Manager 10,000+ Posts
    ERROR CODE 805 in IR 2016

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    what is sub code E805-XXXX
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Trusted Tech 50+ Posts dhanesh's Avatar
    Join Date
    Jun 2010
    Location
    Thiruvananthapuram, KERALA
    Posts
    63
    Rep Power
    0
    fan is working am checked that fan in an another machine
    DHANESH

  6. #6
    Service Manager 10,000+ Posts
    ERROR CODE 805 in IR 2016

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    FM1 Heat discharge fan Cools fixing unit.

    E805 0000 Fan failure
    only one in this copier>
    The fan is faulty. -
    Check the fan connector.
    - Replace the fan.
    - Replace the DC controller PCB.


    Switching between full-speed rotation and half-speed rotation is controlled as described below.
    1) Full-speed control
    When the CPU on the DC controller outputs a fan full speed signal (FAN_FULL), the fan drive voltage switching circuit supplies a +24 V fan drive voltage to turn
    the heat exhaust fan at the full speed.
    2) Half-speed control
    When the CPU on the engine controller outputs a fan half speed signal (FAN_HALF), the fan drive voltage switching circuit supplies a +16 V fan drive voltage to
    turn the heat exhaust fan at the half speed.

    E805-0000 (Main body fan error)
    When the cooling fan of the main body starts, the fan lock detection signal (FAN_LOCK) has been held at the "H" level for longer than the prescribed time.

    also check your low-voltage power supply
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here