Having a probplem with adf not staying up at half way point , is there an adjustment for tension or is replacement of hinges the only solution. Thanks everyone
Having a probplem with adf not staying up at half way point , is there an adjustment for tension or is replacement of hinges the only solution. Thanks everyone
On the 5000's, we used to shim the left hand hinge with 2 of these horseshoe shaped shims. FC8-9927-000
I have never attempted it with the 550, I tell the customer to place the feeder fully upright and it will stay, the 5000's could not normally be placed fully upright. To place the shims on the 5000's, remove the 2 hinge brackets from the back of both hinges, 1 screw each.
Replace them.
Or try the shims.
Its really not that big of a deal.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Bookmarks