1. my canon ir3300 machines is responding late to every function and it is taking time to warm up.
2. can i myself upgrade the software of machnie.
Thanks: 0
Likes: 0
Dislikes: 0
1. my canon ir3300 machines is responding late to every function and it is taking time to warm up.
2. can i myself upgrade the software of machnie.
You would need the SST and the system software to upgrade. Also probably need a hard drive, from what you said it sounds like it is getting slow and maybe ready to die on you.
get someone to update the Firmware on printer/ if u never did it beforeOriginally Posted by rais_a1
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
your hard disc format re program
Using SST still the better solution
u need the SST & Firmware before a Format of HD/ on imageRunner
u should have posted that info
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
You might be able to get away with a hard drive clear...you might just have corrupt data on the drive. I would certainly try that before using the SST. After doing the HD CLR you will need to reinstall all user settings so make sure you print out all the units data sheets before you do anything. If you want more info on how to do the procedure let me know and I can post more info .
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
hi,
i have already tried everything. we have very much service problem here. i have to wait for 2 months if i would call service engineer. and also here are very disturbances now a days.
so can you kindly please send me system software for ir3300. i shall be very thankful to you.
please help
my email address is awonservices@yahoo.com
hi
now i got error code e602-0002 error
i cannot connect my pc to machine through parallel cable
Kuby's post in July correctly advised you that your hard drive sounds like it is slowing down and getting ready to die on you. You'll need a new hard drive now and will have to use the service support tool to reload the system software. Probably time to call a Canon rep and get this problem solved for good.
If you wanted to attempt this yourself there are a ton of posts on this site that will give you an idea what's involved but -
you need to download the system software for the machine or version you need. unpack it and register it with sst . You'll need the correct cable, its not a simple thing to use. Even after reading the service support tool manual it still can be complicated until you learn how to actually do it.
Call a Canon guy and be done with it.
Reply With Quote
Bookmarks