Thanks Thanks:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    East Coast Imaging 2,500+ Posts
    iR3300 - just wont print via computer's parallel.

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    Quote Originally Posted by SCREWTAPE View Post
    I believe there is also a 128MB memory stick that comes along with the printer kit.
    I could be confuse with the IR5000/6000 series. I remember one of them required a stick.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  2. #12
    Senior Tech 250+ Posts
    Join Date
    Sep 2008
    Location
    Penang
    Posts
    440
    Rep Power
    36
    Quote Originally Posted by SCREWTAPE View Post
    I could be confuse with the IR5000/6000 series. I remember one of them required a stick.
    For iR3300 ,128MB memory stick should be good enough,unless you need to do a lot of job build.

  3. #13
    Service Manager 250+ Posts
    Join Date
    Sep 2008
    Posts
    384
    Rep Power
    35
    Network printing makes it easy to print from any device on your network. You can also pull scan in B&W over the network. Getting a network kit installed is well worth it. From just a photocopier, to a photocopier, printer and scanner. I use Adobe Acrobat with the Canon Network ScanGear Tool to scan.

    Note that when you get the network kit installed you'll need to get the firmware on the copier upgraded via SST to install drivers for printing and other things to get the copier working with the new hardware (be sure not to install drivers for stuff you don't have - if you don't have a FAX kit then don't install the drivers for that).

  4. #14
    Technician
    Join Date
    Jul 2023
    Location
    northwest
    Posts
    13
    Rep Power
    2

    Re: iR3300 - just wont print via computer's parallel.

    Greetings.waited for your response as concerns the above. please i still got similar problem, and wish to know of your solution
    Quote Originally Posted by betinoman View Post
    hi velocd
    first of all, sorry by mi english, i am from monterrey mexico.

    long time ago, i had the same problem, the costumer was very ungry, we have to install a network card,because the pararell dont work, in service mode none item for these problem, so you have to search in copier option (*) some item that said something abot pararell, in this case, i activate thes option and the copier start to print in this port, let me check in one ir, and i post back, whith the exactly route, to resolve you problem, ill posting tomorrow at this time.

  5. #15
    Service Manager 10,000+ Posts
    iR3300 - just wont print via computer's parallel.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Re: iR3300 - just wont print via computer's parallel.

    Quote Originally Posted by Tefao View Post
    Greetings.waited for your response as concerns the above. please i still got similar problem, and wish to know of your solution
    doubt you will get a fix from this thread... last post in it was in 2010.

    lemme suggest you start a new thread in the proper machine forum.

    list model#
    any work done on it
    a PDF of the config page would be helpful
    list everything you have tried w/ results
    list any errors received
    list model of PC
    list Operating system version

  6. #16
    Technician
    Join Date
    Jul 2023
    Location
    northwest
    Posts
    13
    Rep Power
    2

    Re: iR3300 - just wont print via computer's parallel.

    Greetings. I tried following these steps below and noticed that my boot-rom version has anN, but still yet I can't get it to print with the parallel cable.
    Please I need help.
    Quote Originally Posted by sgcopiertech View Post
    iR3300 machines can print via parallel port (LPT)

    the most probable cause is that just your machine is not equipped to print.
    please make sure that the machine has a N or H boot rom.

    press * 2 8 *
    press copier
    press version

    check your boot rom vesion

    if you see a C behind the version i.e. ( xx.xxC )
    then your machine would not be able to print at all.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here