Tech Tips/imageRUNNER ADVANCE C9075PRO Series or imageRUNNER ADVANCE C7065 S

[teckat]

TIPS: imageRUNNER ADVANCE C9075PRO Series
or imageRUNNER ADVANCE C7065 Series

1.When installing a new imageRUNNER ADVANCE
C9075PRO Series or imageRUNNER ADVANCE C7065 Series
main engine, be sure to execute Auto Correct Color
Mismatch, Shading Correction and then Full Auto Gradation
Adjustment. This will ensure optimal color quality output
including halftones and robust color.

2.If an imageRUNNER ADVANCE C9075PRO Series or
imageRUNNER ADVANCE C7065 Series machine requires flexibility
when using various stocks, enable the following in Service
Mode Level 1:
COPIER>OPTION>DSPLY-SW>IMGC-ADJ>0 TO 1
This Service Mode enables the end user to adjust the image position,
secondary transfer voltage and tail end white patch correction
in Paper Type Management Settings. This will enhance the end
users capabilities to ensure optimal color output on specific paper
stocks.

[SCREWTAPE]

TIPS: imageRUNNER ADVANCE C9075PRO Series
or imageRUNNER ADVANCE C7065 Series

1.When installing a new imageRUNNER ADVANCE
C9075PRO Series or imageRUNNER ADVANCE C7065 Series
main engine, be sure to execute Auto Correct Color
Mismatch, Shading Correction and then Full Auto Gradation
Adjustment. This will ensure optimal color quality output
including halftones and robust color.

I remember when i installed my first 7055 I experienced registration issues and perform the Auto Gradation
Adjustment and it was corrected. I was relieved.

So this info is good to know.

Good post Tec.

[teckat]

ELVIS..jpg
thank ya' and enjoy the show !

[Canuck]

Tons of color registration/itb issues with that machine...see bulletin NO9-025 from Canon

[teckat]

POST IT

[Canuck]

You can get it from e-support in the U.S.A. if you are an authorized dealer,can't you? I have never posted a Canon issued document on this site and never will....i like my job

[teckat]

You can get it from e-support in the U.S.A. if you are an authorized dealer,can't you? I have never posted a Canon issued document on this site and never will....i like my job

in USA they are Tech Pubs./ have seen those Reg issues & the fix/

[Canuck]

I got it from Extranet net in Canada...i have access to both....same bulletin...different spring combinations,boss placement, blade mounting,etc

[Fer]

I had hard paperjam on a C7065, it was caused by a broken spring, which should keep inplace one of the white plastic rollers mounted in the lower left door. The (duplex-)reversing section, just under the delivery.

Reading the manual i discovered the white plastic roller was pushed out of position by an actuator arm, every passing page. This caused the spring to break.

I'm curious is this an incident, or did anyone see this also, and dit Canon safe €0.01 on a retainer spring.

[teckat]

1/2 cent