Network ScanGear / Color Network ScanGear
Symptom: Single Pass ADF on an imageRUNNER/
imagePRESS/imageRUNNER ADVANCE device performs a
multi-pass method for scanning originals when utilizing
Network ScanGear or Color Network ScanGear for
scanning into a desktop application.
Solution: When used in conjunction with any imageRUNNER/
imagePRESS/imageRUNNER ADVANCE device equipped
with a Single Pass ADF scanner, Network ScanGear and Color
Network ScanGear can be configured to perform a single-pass
scan within its TWAIN driver User Interface by selecting
"Feeder (HiSpeed 2-sided)." This selection tells the ADF to
scan both sides of an original in one pass rather than multiple
passes. Scanning in a single-pass offers a huge improvement on
scan times. When scanning into an imaging application be sure
that the ScanGear User Interface is available to make this selection.
Steps to enable “Feeder (HiSpeed 2-sided)” on
eCopy ScanStation:
1. Run eCopy ShareScan Administration
2. Under “Devices”category for the ScanStation PC,
Right-Click - Select “Manage”
3. Under “Status” tab, select “Network ScanGear v2.21” or
“Color Network ScanGear v2.61”
4. Enable checkbox for “Use TWAIN user interface
for settings”
5. Click “Save” and Close
6. Run ShareScan Client
7. Select desired eCopy Connector
8. The ScanGear user interface will appear, select
“Original Placement” and from the drop down select
“Feeder (HiSpeed 2-sided)”
9. Select “Scan” button and notice that both sides of the
original are scanned in one pass
Steps to enable “Feeder (HiSpeed 2-sided)” in
Adobe Acrobat:
1. File -> Create PDF -> From Scanner... ->
Change Format to 'Double-sided'
Bookmarks