Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Aug 2009
    Posts
    213
    Rep Power
    32

    iRC3220 error code E602-0202

    Good day guys,

    Would like to get some tips to troubleshoot these iRC3220 with the code E602-0202.

    I have changed the HDD but still the same problem.

    Any idea guys that can you advice me ?

  2. #2
    SanDiegoCopierRepair.com 1,000+ Posts
    iRC3220 error code E602-0202

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    1,248
    Rep Power
    51
    Workaround :

    Try doing this first:
    1) Service Mode/Copier/Function/System/Chk-type/ 1 / ok.
    2) Then Hd-clear/ ok.
    3) Turn machine off and on and let machine reboot.

    Also could be the main controller board. There could also be a bad SRAM pcb that can cause this problem but if that is the case you might have trouble getting that pcb.

    Note: The SRAM PCB is a Controlled Item and must be ordered through Engineering Service. You cannot, under any circumstances, swap it from another machine since it will cause a mismatch with the Counter Memory PCB.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  3. #3
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Clinton, Iowa
    Posts
    1,976
    Rep Power
    54
    May I ask what exactly you did, when you refer to "changing the hard drive"?

    SST to format the hard drive and then loading the system software should resolve almost every 602 error out there.

    As Blaze referred to, the main controller, or the ribbon cable, can also give you this error. I have replaced in excess of 50 hard drives for 602 errors, and not one of those was ever due to the main controller.

    More info on your procedure please...

  4. #4
    Service Manager 100+ Posts
    Join Date
    May 2008
    Posts
    228
    Rep Power
    35
    Quote Originally Posted by blazebusiness View Post
    Workaround :

    Try doing this first:
    1) Service Mode/Copier/Function/System/Chk-type/ 1 / ok.
    2) Then Hd-clear/ ok.
    3) Turn machine off and on and let machine reboot.

    Also could be the main controller board. There could also be a bad SRAM pcb that can cause this problem but if that is the case you might have trouble getting that pcb.

    Note: The SRAM PCB is a Controlled Item and must be ordered through Engineering Service. You cannot, under any circumstances, swap it from another machine since it will cause a mismatch with the Counter Memory PCB.

    I always swap (change) SRAM pcb when my iR c3220 hangs up with no problem.

  5. #5
    Service Manager 10,000+ Posts
    iRC3220 error code E602-0202

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by nivssluck View Post
    I always swap (change) SRAM pcb when my iR c3220 hangs up with no problem.

    You keep posting More False info>>>
    SRAM PCB'S Can never be swapped in the 3220/ I have worked in Canon Engineering .

    The SRAM PCB is a Controlled Item and must be ordered through Engineering Service. You cannot, under any circumstances, swap it from another machine since it will cause a mismatch with the Counter Memory PCB. Please contact the Canon Technical Support
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Service Manager 10,000+ Posts
    iRC3220 error code E602-0202

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by Blues Guy View Post
    Good day guys,

    Would like to get some tips to troubleshoot these iRC3220 with the code E602-0202.

    I have changed the HDD but still the same problem.

    Any idea guys that can you advice me ?

    E602_0202

    The partition FSTDEV is faulty.
    File system (logic) error: error detection
    by check processing; mounting failure

    FSTDEV -May be formatted in normal mode

    FSTDEV and FSTPDEV retain image data as it accumulates while DOSDEV and
    DOSDEV2 retain its associated data; these 4 partitions, therefore, must be formatted at the
    same time. To do so, select FSTDEV using the SST.
    The actual formatting of FSTDEV and PDLDEV takes place when the machine is started
    up the next time, and it takes as long as the following:
    FSTDEV: 2 min (approx.)
    PDLDEV: 5 min (approx.)
    all partitions: 7 min (approx.; i.e., FSTDEV + PDLDEV)
    The times vary according to the state of the HDD, and the progress of formatting is indicated
    by means of a progress bar.

    Formatting of DOSDEV4 requires the use of the SST.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Junior Member
    Join Date
    Mar 2016
    Location
    ROSLINDALE
    Posts
    8
    Rep Power
    0

    ImageRUNNER c6800 error code E602-0202

    got this error on my ImageRUNNER c6800


    00L0L_9TGXZJOF6AQ_600x450.jpg

    00V0V_8w6C26qVUz1_600x450.jpg


    any hepl

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here