I am getting E500-001 on 7105. The code is not listed in the Service Manual. What does the error mean.
Thanks
I am getting E500-001 on 7105. The code is not listed in the Service Manual. What does the error mean.
Thanks
a machine is only as good as your tech : source:screwtape ; the scary one
Come on David!
That's a finisher error code.
You would have to look in a finisher service manual for info.
This a communication error probably.
Turn off everything and reboot by putting the finisher first then the main unit.
If this doesn't work check the finisher controller pcb for now.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Actually , that code is not in the finisher manual either. So to clear up that lack of info - It is a Finisher Communication Fault.
First visually check all cables and connectors .
Check the power coming from the power supply of the finisher. 5volts brown wires / 24 volts red wires.
Check the connection of the Arcnet cable and that it is installled correctly. Good luck - Blaze
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
screwtape: I do agree with you i am getting old. ha ha
anyway i did check the finisher fault codes in the manual they start from 501 .
blaze: i concluded its a finisher PCB error. I have replacement board on the way.
I will keep you guys posted.
a machine is only as good as your tech : source:screwtape ; the scary one
Bookmarks