First at all, make sure, that the atr and the patch sensor is clean
If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!
Not after 2/3 sec after turn on. When I turn on machine start to warm up when finish it start to enter into gradation process when it is in that process it start to rotate the whole mechanism I think its 3, 4 seconds then it stuck
SORRY FOR MY ENGLISH I AM TANZANIA from E.Afrika
no problem, your english is fine, at least for me
If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!
Last edited by teckat; 08-12-2010 at 12:17 AM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
samsogoye:
Take off the front cover and see if the drum is turning> if not
Check if the screw is broken on the drum shaft in the back of the machine.
the screw that holds the gear on the drum shaft.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Yes I know how to remove it I use its service manual because it is my first time to deal with this big machine, before I was manage to fix replace yellow cartridge issue so now I have the code error mentioned, About the drum its okey it rotate, On my service manual I was try to search for those Sensor I discover things like this. on link ir 6800
remove those units inspect/clean or replace them/
how old is Drum/ was it ever replaced ?/ how many copies on 6800 ?
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks