Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 36
  1. #21
    Technician samsogoye's Avatar
    Join Date
    Aug 2010
    Location
    Mwanza
    Posts
    30
    Rep Power
    28
    Its about 216,800 copies it has never replaced,

  2. #22
    Service Manager 10,000+ Posts
    iR 6800  Error E000061-0008

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by samsogoye View Post
    Its about 216,800 copies it has never replaced,

    That is ok/ but replace cleaning blade
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #23
    Technician samsogoye's Avatar
    Join Date
    Aug 2010
    Location
    Mwanza
    Posts
    30
    Rep Power
    28
    Okey thanks Teckat

  4. #24
    Technician samsogoye's Avatar
    Join Date
    Aug 2010
    Location
    Mwanza
    Posts
    30
    Rep Power
    28
    Hello my brothers I have got a new service manual From tectat and I have found the following information:

    15.3.2.3.7 Extreme fogging due to poor connection of LED array for pre-conditioning unit/Occasional E061-0003 Error Code
    0009-9283
    iR C6800
    [ Inspected by Canon Inc. ]
    escription
    Extreme fogging occurred on images (including non-image area) because the connector [1] (J206) of the LED array inside the AP kit had poor connection.
    As a result of inspection it was also found that E061-0003 sometimes occurred and E061-0008 was recorded in the error history.
    Field Remedy
    When a symptom occurs, re-insert the connector on both the LED array and AP kit sides.

  5. #25
    Technician samsogoye's Avatar
    Join Date
    Aug 2010
    Location
    Mwanza
    Posts
    30
    Rep Power
    28
    Any information regurds to this quote here:

    15.3.2.3.7 Extreme fogging due to poor connection of LED array for pre-conditioning unit/Occasional E061-0003 Error Code
    0009-9283
    iR C6800
    [ Inspected by Canon Inc. ]
    escription
    Extreme fogging occurred on images (including non-image area) because the connector [1] (J206) of the LED array inside the AP kit had poor connection.
    As a result of inspection it was also found that E061-0003 sometimes occurred and E061-0008 was recorded in the error history.
    Field Remedy
    When a symptom occurs, re-insert the connector on both the LED array and AP kit sides.

  6. #26
    Alan Aya
    Guest
    Quote Originally Posted by samsogoye View Post
    Hello,
    I need your help on this printer when I turn it on it start waming up when it start initializing the whole system it stuck and pring this error message.
    Sam From Tanzania E.Africa
    Potential sensor or potential sensor connector could be the problem. E061 can also be the laser unit problem.
    Check the potential sensor connector (1 of the 5 connector) in front, u need to disconnect it when u want to service the processing unit.The wire could have been broken due to pulling of the wire when disconnecting the connector.

  7. #27
    Trusted Tech 50+ Posts Paul 75's Avatar
    Join Date
    Oct 2008
    Location
    London, England
    Posts
    97
    Rep Power
    32
    Has the drum phase ever been adjusted on the machine yet? This could also cause an issue.
    Oh...... I can't copy at the moment then ? !!!!!!

  8. #28
    Technician samsogoye's Avatar
    Join Date
    Aug 2010
    Location
    Mwanza
    Posts
    30
    Rep Power
    28
    Quote Originally Posted by Alan Aya View Post
    Potential sensor or potential sensor connector could be the problem. E061 can also be the laser unit problem.
    Check the potential sensor connector (1 of the 5 connector) in front, u need to disconnect it when u want to service the processing unit.The wire could have been broken due to pulling of the wire when disconnecting the connector.
    I think those connection they are located at the light side in front. if its that their okey.

  9. #29
    Technician samsogoye's Avatar
    Join Date
    Aug 2010
    Location
    Mwanza
    Posts
    30
    Rep Power
    28
    Quote Originally Posted by Paul 75 View Post
    Has the drum phase ever been adjusted on the machine yet? This could also cause an issue.
    Am not sure because It has passed to more than 4 tech here in Mwanza, so am not sure if it has been adjasted, You can give me a tips to know if it has been adjasted.

  10. #30
    Senior Tech 100+ Posts
    iR 6800  Error E000061-0008

    songela's Avatar
    Join Date
    Mar 2008
    Location
    dar es salaam
    Posts
    215
    Rep Power
    35
    Quote Originally Posted by samsogoye View Post
    Thanks let me start this mission because here in Tanzania its imposible to find those iquipment..thanks thanks
    May I correct your statement of equating difficulty to impossible. In fact it is difficult to find those parts, but when you admit to be impossible, you automatically cease to keep on trying.
    If the problem is not solved yet, give a call on 071 324 5522.
    Regards!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here