Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 4 of 4 FirstFirst 1234
Results 31 to 36 of 36
  1. #31
    Technician samsogoye's Avatar
    Join Date
    Aug 2010
    Location
    Mwanza
    Posts
    30
    Rep Power
    28
    Poa kaka
    Quote Originally Posted by songela View Post
    May I correct your statement of equating difficulty to impossible. In fact it is difficult to find those parts, but when you admit to be impossible, you automatically cease to keep on trying.
    If the problem is not solved yet, give a call on 071 324 5522.
    Regards!

  2. #32
    Field Supervisor 500+ Posts
    iR 6800  Error E000061-0008

    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    792
    Rep Power
    45
    Drum Phase Adjust:

    Enter Service mode

    Copier>Function>Misc-p>dr-p-adj

    check it and press ok, the mashine does the adjust automatically and the result should be an *OK* popping up
    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

  3. #33
    Technician samsogoye's Avatar
    Join Date
    Aug 2010
    Location
    Mwanza
    Posts
    30
    Rep Power
    28
    Herrmann thanks for help,

  4. #34
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Clinton, Iowa
    Posts
    1,976
    Rep Power
    54
    Quote Originally Posted by herrmann View Post
    Drum Phase Adjust:

    Enter Service mode

    Copier>Function>Misc-p>dr-p-adj

    check it and press ok, the mashine does the adjust automatically and the result should be an *OK* popping up
    This should be done AFTER physically incrementing the drum to the next slot in the 4 slot key. 1>2, or 2>3, or 3>4, or 4>1.

    The whole purpose of drum phase changing, is to keep the image area moving on the drum to reduce electrostatic fatigue.

  5. #35
    Technician samsogoye's Avatar
    Join Date
    Aug 2010
    Location
    Mwanza
    Posts
    30
    Rep Power
    28
    Currently the drum is in phase 1>2 , Do I suppose to change phase? and when I suppose to change phase?

  6. #36
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Clinton, Iowa
    Posts
    1,976
    Rep Power
    54
    Quote Originally Posted by samsogoye View Post
    Currently the drum is in phase 1>2 , Do I suppose to change phase? and when I suppose to change phase?
    250,000 copies is the factory spec for this, doing it earlier will not harm anything, be sure to reset drum phase counter so the copier won't start nagging you to do it later...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here