Anyone know how to change counter on iR5570 or iR4570, thank you.
Anyone know how to change counter on iR5570 or iR4570, thank you.
Doing so is illegal!
Please do not ask again!
“I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins
caution.jpg
safety_no_brain.JPG
Please Don't Waste Our Support Forum with Nonsense Questions
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Canon , Inc.
It is illegal to tamper with this circuit in an attempt to falsify the counter readings of any Canon
Copier.
the Counter Memory, Serial Number and Main
Controller PCBs work as a set and are considered the “Soft Counter Circuit”. The Counter Memory PCB is
electronically stamped with the serial number from the Serial Number PCB. Neither the Counter Memory
PCB nor the Serial Number PCB can be swapped to other equipment.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Press and hold down the "Zero" button for two hours, but make sure you do not release it at all or you will have to start all over.
Good luck.
Yea, like I would like, stay there two hours holding down a button.
It would suck if you had to take a crap!
LOL
Get outta here!
Last edited by SCREWTAPE; 08-15-2010 at 07:25 AM.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Yeah! Just having fun with these people that want to reset total counters
O,Originally Posted by claudio
I thought you was serious..
Good God.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Bookmarks