Thanks:
0
Likes:
0
Dislikes:
0
-
I can turn a screw...
250+ Posts
- Rep Power
- 34
IR-C5180 Copy color default?
Hey guys, is there anyway that I can default this machine to do black copies on default, but still have FULL color as an option? Here's what I did......
Additional Functions
system settings
scroll to page 4/4
Color Mode for copy
use auto color select - turned off
use full color - off
I thought that did it but apparently it only gives single color and then 2 colors without a full color option for copying.
I turned use full color back on, but then it defaults to full color.
ideas?
-
Set the copier up the way that you want it to look on power up, then go into additional functions and set it as the default.
-
You just need to set it to default to B/W.
Set it to B/W then go into Custom copy settings to the last page. Look for "Standard Copy Settings" and hit store.
This will lock the default to B/W but still allow you to select auto/full color when you need to.
There is another way to setup department ID's just for color but this will have the ID mode as the default screen.
edit: MrFixit, beat me to it
-
Mr Fixit is correct. You weren't far off. You set on the main screen your settings (ie B/W mode) then go in to additional functions, then Copier, then scroll down till you see... I believe the choice is store. At that point you have the default done.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks