I have a 3300 its image is spreading letters copy attached.... IMG.pdfIMG.pdf
can any one help me. also i need sst and firmware
My email id is wecare.tvm@gmail.com
I have a 3300 its image is spreading letters copy attached.... IMG.pdfIMG.pdf
can any one help me. also i need sst and firmware
My email id is wecare.tvm@gmail.com
by the looks of the attachment it is not your scanner. I would say to stop a copy before the paper gets to the fuser and see if you have the smearing at that point. If you do then you have a drum or developer issue. If the copy looks fine then rebuild your fuser.
Accidents don't just happen. They must be carelessly planned.
Looks like paper moisture problems to me, print the same job onto different paper stocks/sizes/orientation to see what results you are obtaining.
Looks like paper jerked while transferring. I would check the fixing assembly. Run legal or 17 inch to see if there is a pattern
check the fixing film, is it rotate smoothly ? check manually...................
check ur fixing unit
DHANESH
bineshpaul
is M.I.A/ or has left the Building
ELVIS.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks